Search results for query: *

Has anyone connected a Vtech VCS754 ErisStation to a 3C Univerge PBX using SIP..? Any issues, what specific configurations, user agent did you use..? Thank you in advance...

I have been brainstorming over this for a few days and need help. This is my Cisco LAB environment used for study but also in production for daily use. I am trying to setup a double-NAT network with just one IP from my ISP through the ASA & 3825 going to (2) end nodes and multiple ports for port...

Hello, I just purchased some used 2950T's, 3550, 2610XM and 2651XM for a home lab. Can someone please suggest the gamut of tests I should perform to make sure all is well. Thank you...

Hello, I just purchased some used 2950T's, 3550, 2610XM and 2651XM for a home lab. Can someone please suggest the gamut of tests I should perform to make sure all is well. Thank you...

There is nothing plugged into the USB during boot. I have not attempted to fix the boot error since the screen still blanks out as initially reported. Thanks for your help...

Toshiba P205D-S7438 w/updated BIOS 1.4 encountered a weird display/boot problem. Laptop boots and screen displays characters but reports \windows\system32\winload.exe (0xc000000e) error which I am not sure is related or a 2nd issue. Load Vista 32 disk to attempt repair, screen shows loading then...

I know it's not a Definity but there is no Audix forum (sorry); We have an Intuity LX R1.1 and so far used Web Admin for access. Is there a way to use ASA, Procomm or other? We are looking to run reports and gain more features then current. Any ideas???

Hello, My Dell 2400 Win Xp Pro locks everytime I Reboot or Shutdown. Also, when using IE or Windows Explorer I get the "Windows(or Internet)Explorer has encountered a problem and needs to close". Does anyone have any ideas. I already ran chkdsk /r & sfc /scannow. They both started happening at...

You can play with the emulation between TVI925, TVI920, Wyse50 and Wyse100. Also if you are getting garbage on the line then lower the baud rate to 1200bps. If those things fail then try reseting the modem itself.

It turns out that another tech was in there without our knowledge and messed with the CDR feature (turned it off then on). We found two issues. First we realized that someone took the MWI port out of service and then the FLT card had to be reseated. Thank you for all your help.

The failure is constant. I will re-seat the card tonight and check the amphenol connector. That port is not in the hunt group therefore we could not status that station. I thought this was the proper configuration. It did work at some point. Am I correct to assume this?

This is happening on a larger scale and many users are affected. The CDR only goes back 2 days and this problem is older then that. We have 8 ports and only 1 is dedicated to MWI's with no other functions assigned. There are 122 MBX's built but in reality there are less then 60 users. I already...

I am trying to diagnose an Octel 250 rel. 02.01.05-1 with MWI problems. We are experiencing both stuck on and off lights. I checked the CDR and the Octel does not appear to be sending out a message to the switch to turn on the light (no event code 18). There is only one port designated to turn...

My company just went through some reorganization. I will now be required to troubleshoot and maintain our Octel 250 / 350 and Intuity boxes. I have some skill but need to brush up. Does anyone know where I could get some technician's documentation. Not just the manual they sell with a system but...

KenMeans, do you know where I can get a hold of such a script?

That makes sense, I appreciate your help KenMeans and I will post an update on how everything turns out. Thank you..

Thank you for all your help Kenmeans, unfortunately we have to submit for an approval from the LOB here so things take time before I can actually do this. Just to confirm, after I create the type 32 main mbx and the type 29 mbx for the dial by name option, am I using the type 32 or 29 for the...

Correct, we currently have the following options; - Enter the four digit number of the person you would like to leave a message for. - Please press '1' to dial by name - If you have a mailbox on the system please press '#'

I just need one option. From the main system greeting I want the user to press '1' to dial by name and be transfered to the ext of the subscriber and not the mbx. there is already a 4411 directory mbx built on the system.

Thanks for the reply KenMeans, when you press '1' the system idles for a second and then returns a, "1 is not valid, please redial the number you are calling" error message. How do I know how the system was setup (ECP mbx, system manager, or other)? I also received mixed advice on how to set...