Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
2 Internet Address pool and 1 PIX Firewall
Here's the config, PIX Version 5.1(2) nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet4 dmz3 security20 access-list acl_dmz3 permit icmp any any access-list acl_dmz3 permit ip any any access-list acl_dmz3 permit tcp any any ip address outside...- 8873402
- Post #6
- Forum: Security, hacker detection & forensics
-
2 Internet Address pool and 1 PIX Firewall
Hi bell1996, I have to go to the office to post the config. It might be today or on Monday. Thanks- 8873402
- Post #5
- Forum: Security, hacker detection & forensics
-
Source Address Routing
Hi, Here is a little more detail, Router1:- Router2:- Serial0/0.1:-199.230.123.254 Serial0/0.1:-144.156.177.254 Eth0/0:- 216.68.40.1 Eth0/0:- 65.155.168.1 Cisco PIX FIrewall Outside... -
2 Internet Address pool and 1 PIX Firewall
Hi bell1996, I have the staic command in place. Here is what I have diagnosed, If we start a telnet session from 66.165.147.23 to 216.68.40.5, the packet reaches to the firewall and the destination IP is NATED to 10.0.0.13. Source:- 66.165.147.23 Destination :- 216.68.40.5 ->...- 8873402
- Post #3
- Forum: Security, hacker detection & forensics
-
Source Address Routing
I have the WAN Address from ISP configured on my Serial 0/0.1 and one of my public IP Addresses configured on the Ethernet Interface. WAN Address :- 199.230.123.254 Ethernet Address:- 216.68.40.1 -
2 Internet Address pool and 1 PIX Firewall
Hi All, We have 2 Different T1's connected to 2 different Cisco Router's. One of them should serve internet address range of 216.68.40.x and the other is supposed to serve a range of 65.155.148.x The PIX Configuration is ip address outside 65.155.148.254...- 8873402
- Thread
- Replies: 6
- Forum: Security, hacker detection & forensics
-
Source Address Routing
Hi All, We have 2 T1's terminating on their individual cisco router(which have 1 serial interface and 1 ethernet interface). A Cisco Pix Firewall is placed between the routers and the internal Machines. My Question is how Can I translate the source address of any packet coming on... -
Hi All, I am trying to confi
Hi All, I am trying to configure a cisco router 2620 with a serial interface, loopback interface and an ethernet interface. I have my loopback interface configured with our public addresses from our new ISP , and these public addresses are NATed into the ethernet interface ( which is...
