Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. joesnow

    VPN ACL Problem?? or is it?!

    Hiya, Ive gone over this again and again, I just cant understand what is happening here... I have checked the routes on the PCs (.1.x)and servers. from a pc doing a traceroute the packets are sent out to the internet. why is this not happening to the (.1.1) server though and they always go...
  2. joesnow

    VPN ACL Problem?? or is it?!

    OK, configs for your perusal (please god real ips are not in there !! :-) ) hostname routera ! enable password xxx ! ip subnet-zero ! ! no ip domain lookup ! ip inspect name OUTGOING http ip inspect name OUTGOING smtp ip inspect name OUTGOING ftp ip inspect name OUTGOING tcp ip inspect name...
  3. joesnow

    VPN ACL Problem?? or is it?!

    Hiya, I need to keep some of the ACLs so that the VPN and NAT keep working... It is strange that just the servers can see through the tunnel. The local IPs obviously :-) are .1. and .254. on a 2611 and the remotes are .4. and .2. Time for a beer! Joe.
  4. joesnow

    VPN ACL Problem?? or is it?!

    here is the acl for routerA, router B is the exact opposite: thanks... joe. ACL 100 = ip nat inside source list 100 pool OUTSIDE overload ACL 101 = crypto map (match address) ACL 120 and 130 are the ethernet interfaces ACL 110 = not used .. access-list 1 permit 0.0.0.0 255.255.255.0...
  5. joesnow

    Cisco WIC Question

    BTW Check that you have the correct IOS before you start as the ATM interfaces are not covered in older IOS images. Joe.
  6. joesnow

    VPN ACL Problem?? or is it?!

    Just a quick question to anyone who can answer this... I have my VPN set up between two cisco 26x routers. The strange thing is that the servers at either end of the VPN tunnel can ping and connect to each other, however, none of the clients on either side of the VPN can do the same. The ACLs...
  7. joesnow

    Cisco VPN - Headache !

    ok, 30 mins after posting this it started to work..... Is there any way to explain this or change anything to make it better? my next job is to bring a third router into the setup, but routing port 25 traffic (SMTP) in... what a larf !! joe.
  8. joesnow

    Cisco VPN - Headache !

    Hello all, I have been banging my head against this one for a couple of days now and am totaly lost! I have two routers doing LAN-LAN VPN, easy I thought, I configured the two 2611 routers using best guess technology. The problem is that whilst the 192.168.4.x traffic goes through the VPN...

Part and Inventory Search

Back
Top