Search results for query: *

If your network is connected to the internet you will run into problems. The new addresses you would use would not be routed to your network which would prevent you from doing anything on the internet. You are going to have to bite the bullet and switch to a private IP range and begin using...

I think your speed restriction is probably occuring due to issues like processor and hard drive speed. Thanks a ton, codered10

Yes...I misread your first message and didn't notice you were using a public IP address range The other addresses I mentioned in the first post are likely assigned to someone else already, and would not work. You are going to need to either lease more address or follow the advice given in the...

What you can do is change your subnet to allow more address. For example, if you changed the subnet mask on each machine to 255.255.0.0, you could then use any IP address beginning with 192.1.x.x Thanks a ton, codered10

Hi guys and gals...I've inherited a rather interesting situation. I have multiple domains in our school district that are separate forests. As I replace servers we are moving the district to one domain, but that is another story. On one of my older servers, I have an old Tree Root level...

Okay, I missed the earlier post about VLAN's, but we are not using vlans of any sort, so I can quickly rule that out. Also, we are on unmanaged switches, so it's not an issue of throttling. I have not looked whether the switch is showing a 100M connection when I switch the server to 100M. I...

Okay, I seem to have had a small breakthrough. I just forced to card to 10M full duplex and i can ping, etc. Forcing back to 100M full results in previous errors. What would be causing that? Bad network switch? :S Thanks a ton, codered10

Just noticed under services that WINS is not starting anymore...don't know if it's because of the TCP issues or what. Anyone suggestions anybody? Thanks a ton, codered10

Okay, Repair install of Server 2003 did nothing to help Switching to DHCP ends up with an Automatic private address... 169.x.x.x Thanks a ton, codered10

Yes, subnet is correct. Thanks a ton, codered10

Shoot...the way you were asking questions, I was hoping you were going to pull something out of your magical hat for me. It's got me really perplexed right now. I'll let you know if the repair install solves the issue. Thanks a ton, codered10

I've already tried four of them. Also tried different ports on the switch. Thanks a ton, codered10

I cannot ping in the opposite direction either. The physical layer is fully switched 100M network. Thanks a ton, codered10

DNS setting is to our DNS server 10.51.0.2 I cannot ping our gateway from the machine. Out of desperation I am currently doing a repair install of Windows Server 2003, but am not overly optimistic. Thanks for the suggestions Thanks a ton, codered10

Mighty, I'm dealing with what may be a similar issue. What kind of security did you run into on the network interface? codered Thanks a ton, codered10

Okay, Here are the results of the previous suggestions. I ran ipconf /all...everything seems to look okay there ipconfig /release and /renew do not work because I was set to a static IP. I changed the card to DHCP, and received an error that the connection is unable to contact my DHCP...

Hello all, I've recently setup an HP Netserver running Windows Server 2003. It has an Intel Pro 10/100 NIC. Initially when I set the box up, I was having problems with not being able to ping or access the box, but I was able to access the internet, etc. from the box. At the time, I tracked...

I am running low on space on the C drive of my Windows 2000 Server. I have found several other posts and followed the suggestions for removing the Service Pack Uninstall files from the WINNT folder. However, while I was in the WINNT folder, I noticed a large number of folders with the...

Okay...maybe a WAN isn't quite the way to describe our setup. We currently have about 600 computers in the 5 different buildings. Our buildings are connected by a high-speed wireless bridge. We have one external fiber connection for our entire district which is shared over the wireless...

Okay... As I continue to read, I know I have a TON to learn. Any suggested reading would be welcome! On the other hand, can anyone help out on how to join my 5 domains to the same forest? I'm thinking that's a reasonable first step Thanks a ton, codered10