Search results for query: *

With all IP sets, match up the number of local lines with the VCM resources (T1 = 24 trunks = VCM 30, all trunks can be accessed - and you have a couple more for the Voicemail) Main site would need the 30, remote would need the 10. With Digital sets, match up the VCM with the IP Trunks, the...

The small office (IP401 in UK I think - just got released in the States) does not support Digital T1 traffic, right now it is only for WAN connectivity and VoIP trunks. I think this will be added later, but for now if you want a T1 for local lines, you will have to go with the 403,6,or12 with...

IP to IP will not consume the VCM resource for the length of the call, only during call setup. The VCM resources will be consumed for the length of the call when going from the TDM to packet bus. So ... digital set to IP Trunk = 1 VCM resource IP Phone to IP Trunk = momentary VCM resource for...

The advantage of IP Trunking is that you will have better utilization of the P2P T1, with G.729 compression ("toll equivalent"), you will more than double the number of concurrent calls, I tell customers ~30K per call with G.729, but if you bet on ~20K you should be fine. Traditional...

the VPN functionality is still CI on the IP Office, so the VPN will have to be handled seperately. there is a pretty good job aid at support.avaya.com for connecting sites with xDSL (the VPN is already present in the job aid). One thing to keep in mind is that you cannot guarantee QoS over...

downloaded and looking good - thanks!

I haven't heard of this on the new release, but with 1.4(22) I experienced this as a result of paging. If there were too many telephones in say a "page all", then the digital station module would reset. The whole system wouldn't go down, just the one or two of the expansions. in my...

I have a customer that currently has ~14 lines into their office, all with call waiting and voicemail on the line. this is a foreign install, where the country has just allowed the use of company owned pbx's SO getting line provisioning has been an issue. They are installing a 403 with 6408's...

If this is for demo purposes, I think that it is best to connect these together as a small community via IP Trunking, LAN port to LAN port with a standard CAT 5 cable. To the best of my knowledge, connecting two units together via digital trunks only gives you limited (Q.Sig) feature...

I have my floaties ready!

I am about to install a system in Barbados and am wondering if anyone has any helpful tips to ensure this goes smoothly. It should be a basic install with 12 phones on a 403 with 8 analog lines in locally. Tieing back to a Definity in the States for UDP (VCM 5). Just wanted to reach out and...