Search results for query: *

Hello sorry for delay.. We have written a patch for this so this is why it works. With "normal" AS it is not possible. Br,

Or if you have the right setting for ODN, yoy can divert ODN and ADN will follow. :-)

thanks Like this?? - calling party number from node a: 12345678 - called number to Cisco: 13499 Then at node b (transit) nutri:entry=123,cnvtyp=1,numtyp=x,trc=3,tardst=13499; roddi:dest=13499,adc=(d24=1) ?? Trident

We have some nodes with VPN connection and central operator at one node. One of satellite node has Cisco Call Manager connected via ISDN QSIG. The satellite node acts like transit node. When calling from node (A) to Cisco via node (B) as transit SEND SETUP from transit node (B) to Cisco contain...

check adc parameter d4

edit CLOFC:FORM=XX,DATA=XX,APPEND=YES;

Remember that IP-ext is a generic ext. the same as DECT. Ask yourself how a dect phone is used. . . and then you understand that absence reason can not bee shown on display. . .

Route data serv D1

Old problem FR 105834. What SP are you using? This fault report is released in sp8. Install new GJUL4 board in LIM=2&4 and is should be OK. Problem occurs, when exchange backup is prepared in environment with long inter Lim signals (90 Bytes) and loaded into systems with short inter Lim...

I know, but i BC9 you can use only one route to do this

You can read plex as much as you like, but sorry to tell you whosrdaddy in in BC9 you can have DID number as numtyp=ac. This function is not working in BC10 --> Trident

Someone have userguide for Dispatcher application Ddu?

Ok maybe we are talking about two different things, what I ment was the following: you can convert received B-number to any number you like Agree??[bigsmile

Of course this will work: eks: NUTRI:ENTRY=1224098002,CNVTYP=0,NUMTYP=2,TRC=10,PRE=4303; 1224098002 is external number. When someone outside the PABX call this number they are rerouted to 4303. In my case is 4303 an external DEST use with IP Networking. Regards

This will not work.

CNVTYP=6, is for mob.ex. Try CNVTYP=0 and NUMTYP=2

Hi all Anybody know where to find a Signal Trace Interpreter that handles TL11 and TL30? Trident

BC ver? NIU or SIU? I have tried this on our lab: <CLINP; CALL LOGGING DATA CALL LOGGING MODE: ACTIVATED MOBILITY LOGGING MODE: NOT ACTIVATED HEADER FORM DMPSIZ DISCR IN SERVICE LOGABN LOGFAL HRTBT...

You must also set NANLS

use cont in RAGAI Trident