Search results for query: *

NIINI:DIR=..,NAME1=...,NAMDB=YES; ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

At the begin it’s clear How You programmed PELPI? ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

I have not time jet, but for me it looks that is problem with synchronization cable between boards. Have You Alex? Check cables between boards !!!!! It’s abnormally situation that all boards are RING MASTER ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

Can You send printout of CXCFP :FPI=all; ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

It’s new installation? Any alarm in log? Base station are connected to this same board? Check synchronization ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

I can try understand Your problem but Q: who not have correct displayed number, remote or local site? Q: extension 4144 is in local or remote site? Q: NUTRP printout is from local or remote site? If You send printout use MONOSPACED http://www.tek-tips.com/viewthread.cfm?qid=898504&page=1 I...

Can You send NUTRP printout? use monospaced form plese I thing that problem is in Route ACD for example D24 ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

I’m not an expert of TSE but I know this problem from TSW. From Alex: The extension has some type of queue job going on. So oft is then extension make CAB or other extension make CAB to this extension. If You can go to this phone or connect other phone to EQU input and press #001# You can...

79 = TLU44/8 95 = MFU ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

ruliz Extension is in PROGRAM MODE not busy If it’s possible go to phone end switch off program mode or connect other phone to EQU output (MDF) end switch off program ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

In my opinion ADC should be have 26 characters not 27 ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

Try VARO=000020C5 or VARO=000020D5 ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

.. or hard restart Unplug the NIU for a fief seconds ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

Hi Not so quickly To analyze this problem we need printout of command NADAP; RODDP:DEST=ALL; And if You use LCR: LCDDP :TAB=FDT; Please look to thread806-898504 how to send printout this commands in correct format ---------------------------------- If anything can go wrong, it will...

From Alex PARNUM=184 DISA with or without authorization code 0 Common (central) authorization code is required on DISA calls 1 Individual (regional) authorization code is required on DISA calls 2 Individual or common authorization code is required on DISA calls 3 Authorization...

Hi I have this same problem today. First solution is restart the board: RFBOI:BPOS=1-1-00; If problem is still not resolved, unplug the board from magazine wait 2 or 3 seconds and plug the board again. ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

If You have BC 13 (TSW) is other future named parallel ringing. Which version of SW You have? ---------------------------------- If anything can go wrong, it will. (Murphy's Law)

Can you send to as printout of command: IODDP; And FISCP:IODEV=SYSDISK1; If after command above, answer from system is: NOT ACCEPTED DEVICE NOT EXIST IODEV value you can find in printout of command IODDP. IODEV value (name) is in column IODEV/SUBFS in this same row where in column I/O-BUS is...

Hi First You must create destination to route 70. RODDI:DEST=…,ROU=70,SRT=…..; DEST must be declared as ED number (to check it use command NADAP:NUMTYP=ED). I see in your system many (not used) ED numbers. For example 88004. Then: RODDI:DEST=88004,ROU=70,SRT=6; Now is the time to make test. Try...

pls send us RODDP:DEST=ALL; ---------------------------------- If anything can go wrong, it will. (Murphy's Law)