Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. megglesfield

    ELU31/3 FW Upgrade to R6

    Etompau, I have already tried that. Any attempt to reload will result in a board timeout. The board is longer seen by the system (BRDID=254). Moving the board to another BPOS and issuing a CNHUI results in no board found. A CNBOI results in a board faulty or board missing. Is it possible to...
  2. megglesfield

    ELU31/3 FW Upgrade to R6

    Hi, Attemted to upgrade an ELU31/3 FW to CAA 158 0047 R6A as advised on the Asstra Knowledge Base. Something went wrong during the upgrade process and it failed after about 10 minutes. I get no response from a CNBIP, an RFBOI fails and the ID of the card is now 254, indicating to me that all FW...
  3. megglesfield

    SMS Communications Protocol

    etompau, I have used the CPDM (and the IMS) previously. It works fine for sending SMS between DECT, but there is no capability as far as I can work out for sending these SMS to GSM or to email, or receiving SMS from same. Furthermore the centralized directory can only have 500 entries.
  4. megglesfield

    SMS Communications Protocol

    Does anyone have any information on the SMS protocol used with MX-ONE TSW. I understand it uses the PDU format, and by default two ports are required 1814 for SMSS and 1815 for SMSC. I want to replicate what the Ascom IMS does but I cannot find any information on it at all.
  5. megglesfield

    DECT Subscription Problem

    Doktor, Worked out a fix to the fault in your spreadsheet as per my previous post. On the DecOct sheet Replace the existing formula in H4 with =IF(MOD(H3,11)=10,K1,MOD(H3,11)) and put an * in K1. You then get the correct PARK output when the checksum=10 from the formula above.
  6. megglesfield

    DECT Subscription Problem

    Doktor, Thanks for Excel file. However I think it has a problem, at least when related to our SARI. However I work it out manually and when I include my calculated PARK I can register. I worked out the PARK in the following manner: SARI = 100403BD 2. Mulitplied the SARI (Hex)...
  7. megglesfield

    DECT Subscription Problem

    Already double checked for silly mistakes like you mention. I am using the latest boards ELU31/3 and they have the latest firmware as per the Aastra Knowledge Base. Could it be another DECT system and I need to enter the PARK? I have tried in another LIM approx 20Km away and the same problem...
  8. megglesfield

    DECT Subscription Problem

    Tried an RFPUI on both CTLP and CTLMP, no change, also tried an SFCEI and also even RFEXI, no change. Here are the board and BS revs. <CNBIP:BPOS=1-1-20; DEVICE BOARD REVISION INFORMATION DATE: 16SEP11 TIME: 21:38:08 BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD...
  9. megglesfield

    DECT Subscription Problem

    I have tried using CXAKE and GIDIE, not sure how to do a master reset on a DT690. The problem still exists. This is more than one phone, I cannot subscribe any new phones or if I delete the subscription on an existing working phone I cannot resubscribe. This occurs on both the DT690 and DT412.
  10. megglesfield

    DECT Subscription Problem

    Yes Have enough licences CORDLESS-EXTENSION FAL104454 65535 148 Checked the IPEI many times.
  11. megglesfield

    DECT Subscription Problem

    Hi, Having a problem subscribing DECT handset onto the system (MX-ONE TSW SP7). I have many DECT handsets working,but I cannot add anymore. As a test I deleted a working handsets subscription, then a CXAKE, CXAKI:AUTKEY=,IPEI=, but when I try to resubscribe the handset it always fails. I have no...
  12. megglesfield

    Disk Format

    Benaja, Are reloading or restarting? issue LALRL:LIM=ALL; to reload the system. Do you have an LPU display? You should see the display cycle through: 6832 90aa where aa is the memory size probably 64 10 Contact with flash 6y where y = 0-9 will cycle 60-69 and again until INL loads 90 restart...
  13. megglesfield

    CIL over ETHERNET

    Olaoniran, There was a rather crude test programme that Ericsson put together to test this functionality. This runs under a DOS window as a server and allows you to specify any port i.e. 700. I know it did run under Windows 2000 not sure, if later OS are supported though. Regards,
  14. megglesfield

    IP Phone Administrator

    Thanks Simonas but you can restrict the log off capability in the config file. Apart from showing all the devices on one screen and showing their logon status, it really doesn't do very much, and in my opinion is not worth the effort of the install.
  15. megglesfield

    IP Phone Phone Book

    In the config file for IP phones there is an entry for storing phone books on an FTP server; [STOREPHONEBOOKS] EnableStoring=YES FTPUname=Telephone FTPPword=Telephone The instructions in ALEX do not however contain sufficient information (for me) to get this operational. These are: The header...
  16. megglesfield

    IP Phone Administrator

    I have deployed IP Phone Administrator version R1F. The functionality of this application is very limited. It only seems to display whether an IP phone is logged on or not, the IP address, MAC address, model and rev number. It hardly appears worthwhile installing the application with this very...
  17. megglesfield

    DBC42502 Password and Directory Download

    I have three DBC42502 phones which I cannot log onto, either the web interface or SSH. I receive an invalid password, when using the default Telephone as password. The remainder of the phones all with the same firmware, installed on the same subnet, and using the same software server, I have no...
  18. megglesfield

    Dialog 5446 IP Telephone

    Whosrdaddy, Thanks mate that has done the trick.
  19. megglesfield

    Dialog 5446 IP Telephone

    I have a number of Dialog 5446 IP telephones operating on TSW SP7. These work well but do not have the latest phone firmware installed. On boot up they communicate with the SW server and request to download the new the firmware, however when yes is selected to download, the download fails. Is...
  20. megglesfield

    ISDN terminals

    I have a Video Conferencing terminal, that can use ISDN to set up the Video conference. Up to 4 ISDN BRI can be connected to the terminal. Each ISDN BRI is a 2B so that is 128KB for each BRI or 512Kb if all BRI are in use. I have programmed 4 BRI on an ELU28/3 and connected these via ISDN S0...

Part and Inventory Search

Back
Top