Search results for query: *

IN BOTH SIDES I HAD PUT "SIGO STD" OR "SIGO ESN5" AND GET THE SAME.

THIS IS MY CONFIGURATION IN BOTH SITES (A AND B) SITE A CS1K E ============= DES SITE A TN 021 01 VIRTUAL TYPE TIE CDEN SD CUST 0 TRK PRI2 PDCA 1 PCML A NCOS 0 RTMB 4 1 B-CHANNEL SIGNALING TGAR 0 AST NO IAPG 0 CLS UNR DTN CND ECD WTA LPR APN THFD XREP BARD SPCD P10 VNL TKID AACR NO...

IT´S INTERNAL CONNECTION TYPE TRUNK TIE BUT PRI.

GOOD DAY TO ALL, MY ASK IS ABOUT HOW TO SETUP A LINK WITH PRI BETWEEN A CS1K M AND A CS1K E RLS 7, THE CARDS ARE CONFIGURED BUT LINK GIVE MBUSY AND REPORT ERRORS IN THIS LINK, CAN HELP ME WITH SOME TIPS OF CONFIGURATION FOR THIS PRI LINK? THANKS.

GOOD DAY TO ALL I HAVE A CS1000M RLS 5.5 AND I NEED TO CONNECT TO TWO BCM50 VIA IP TRUNK SIP, 3 FOR EVERY BCM50, MY DOUBT IS WHICH ARE THE STEPS FOR TO DO THIS CONECTION, CAN YOU HELP ME WITH THIS OR TELL ME WHICH NTP´S USE? THANKS.

THANKS FOR YOUR HELP MY HOT LINE IS WORKING WELL GOOD LUCK

I CAN DO IT FOR INTERNAL DN BUT NOT FUNCTION FOR NUMBER EXTERNAL I TRIED WITH SCL AND IN THIS OPTION I CAN DIAL TO NUMBER EXTERNAL BUT IN HOT DIAL NOT I CREATE A HOT LINE LIST AND I PUT IN THE KEY 00 HOT L 0004, IN LD 18 I CREATE LSNO 4 WITH 910352204 BUT NO FUNCTION I CREATE A SCL WITH THE...

HI TO ALL I NEED TO INSTALL A PHONE WITH NEXT OPTIONS: WHEN THE USER LIFT THE HEADSET AUTOMATICALLY THE CALLED GO TO DN XXXX OR EXTERNAL NUMER WITHOUT THE NUMBER WAS DIALED HOW I CAN DO IT THIS OR SOME TIPS? THANKS

view www.cisco.com and search interoperability nortel and give samples of config

I PRINT WITH LD 20 AND TELL ME 7700 ACDN 7750 ACDN AND I GOING TO LD 23 FOR DELETE AND I CAN´T DO IT

GIVE ME THE ERROR SCH0725

HI TO ALL I AM TRYING OF REMOVE 2 ACDN 7700 AND 7750 AND SYSTEM TELL ME THAT I HAVE ACTIVE AGENTS BUT PRINTING AL TNB AND DON´T SAW THOSE AGENTS MY SYSTEM IS OPTION 11 RLS 22 SOME IDEAS? THANKS

there any tool for read this diskette for view the info?

HI TO ALL HOW I CAN BACKUP DATABASE FROM MY PBX 61C RLS 23.55 WHAT ARE THE LD´S FOR BACKUP IF MY PBX HAVE A DAMAGE AND I CAN HAVE BACKUP OF THE CONFIG OF ROUTES , PHONES, NCOS, CODES, DIAL PLAN, BECAUSE IN THE FLOPPY FOR THIS BACKUP I CAN NOT DO IT THANKS

THANKS FOR YOUR HELP AND I NEED CLS HTA FOR WORK IT THANKS

HI TO ALL I SETUP AN IP PHONE 1140 AND I SETUP THE NEXT KEYS KEY 03 SCR 2200 KEY 02 SCR 2199 KEY 01 SCR 2198 KEY 00 SCR 2197 BUT WHEN INCOMING CALL TO KEY 00 AND ANOTHER CALL IS INCOMING LISTEN OCC AND NOT DO THE ROLL TO OTHER KEYS WHAT I NEED DO? THANKS

i have links with speeds of 128kb, 256 kb and 374 kb with vpns and equipment juniper in the display show me CS 1000 but the ip phone give me tone and i can call the other stations but only not show me the classical display DN XXXX DATE HOUR TRANS CONF FWD MORE.. ONLY CS...

HI TO ALL I HAVE INSTALLED SOME IP PHONES 2001 WITH ADSL AND HAPPEND THE NEXT: SOME SHOW ME IN DISPLAY THE DN AND DATE AND HOUR AND THE OTHERS ONLY SHOW ME "CS 1000 AND DATE AND HOUR" BUT NOT THE DN, ANYBODY CAN EXPLAIN ME BECAUSE HAPPEND THIS IT? THANKS

HI TO ALL I HAVE SOME DOUBTS: HOW I CAN SEE THE IP ADRESS OF EVERY IP PHONE INSTALLED IF I AM NOT NEAR AND IF IS POSSIBLE CHANGE THIS IP ADRESS REMOTELY OR SOME TIP FOR DO IT THANKS

I CAN GET TO DO WORK IT MY CORP DIRECTORY I AM NOT PUSH APPLY BUTTON AND FOR THIS REASON WHEN I TRIED UPLOAD THE FILE NOT WAS TRANSFER IT. THANKS