Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. austech

    IPS DCON Command

    Thanks guys, command E8 does the trick. Jesse PABX Sales and Service
  2. austech

    IPS DCON Command

    Hi, does anyone know the DCON command (display connection)on the IPS system? I know it exist's as I have seen engineering use it but they are not too forthcoming. Thanks Jesse PABX Sales and Service
  3. austech

    Retrofit 2000

    If there are attcons or deskcons, you will have to change the keydata in cmd>9000 as the key mapping changes. Also some of the ISDN programming is not carried over cmd>3589 CRC checking for example and most definitely, if you have No7 CCIS, the firmware chips on the SC00 need to be changed to...
  4. austech

    Night Switch on IMX

    Hi gbaughma, the client wants to remove the attcons entirely so in point 3 with the hard wired switch, what hardware is required within the IMX and also the programming steps. The manuals are very vague with this option. Thanks Jesse Jesse PABX Sales and Service
  5. austech

    Night Switch on IMX

    There's alot of things NEC should do to make their switch more installer/user friendly as well as feature compatibility across the range. Jesse PABX Sales and Service
  6. austech

    Night Switch on IMX

    Hi, does anyone know if there is a method of night switching an IMX without using the switchboard ATTCON? One of my customers wants to do away with their attcons but still requires to night switch the system to change the RCS classes at night. Thanks Jesse Jesse PABX Sales and Service
  7. austech

    2000 ivs2

    Hi, this might be a problem related to the electrical supply. Check the voltages on the power outlet and make sure that it is not fluctuating or dirty, check/change the batteries if any and also check the earth on the switch. Make sure that it is functional as well as there isn't any...
  8. austech

    Find unused extensions on 2000IVS?

    Sorry, forgot to mention that this command has trouble detecting fax machines and modems connected to the PBX. What we do is make busy the extn and change the RSC to block all external calls and then wait and see if anyone complains. Jesse Jesse PABX Sales and Service
  9. austech

    Find unused extensions on 2000IVS?

    Hi, you can use command EC1. This command displays if there is a terminal connected at the end of the cable, if it's a SLT or digital, if there is a card mounted in the PIM etc.. Format EC1>xxxx: aa bb cc xxxx- extn number aa- 00 SLT 10 digital bb- 00 Terminal not connected 01...
  10. austech

    MAT software for SOHO 2000 IPS

    Hi, just wondering were I can get a copy of the SOHO 2000 IPS MAT software. If possible, I need to get to the software to Australia. Thanks Jesse PABX Sales and Service
  11. austech

    HOW TO ENABLE G729a COMPRESSION ON DTERM IP PHONE?

    What type of NEC switch is operating in California, IPS or IPX? All your compression and CODECS are assigned and controlled on the NEC switch not at the handset. Jesse PABX Sales and Service
  12. austech

    HOW TO ENABLE G729a COMPRESSION ON DTERM IP PHONE?

    Hi, assuming that the IPS has already been configured and programmed correctly for VoIP and ALL the CODECS and location data has been set for G729a, you assign the location data to the extension using command 1239. You need to have location data set for the IP-PAD, IP trunks (if any) and the...
  13. austech

    MATWorX Ver 6.3 CSV files

    Hi, has anyone been able to create CSV files using Excel and sucessfully importing and running the script using the MACH script editor in 6.3 It seems that with MATWorX 6.3, the CSV format has changed but nobody knows what this new format is. I am forced to have an earlier version of MATWorX...
  14. austech

    2000IVS. An extension that cannot page

    Have you tried assigning new extension numbers (analogue or digital) leaving the problem extension as is and try to page using 88? It would be interesting to see if the problem also occurred on the additional LENS. I would also try to connect a test handset ( analogue ) straight across the CO...
  15. austech

    MIFM

    The MIFM card should be inserted into slots 1 or 2 for the modem to work. Also the extn number for the modem cannot be used or programmed anywhere else within the system except for memory block 1-8-38 and if you use DID tables (1-1-22) make sure it is programmed there as well for day and night...
  16. austech

    NEC Dterm Series i IP adapter

    It might not be as simple as a firmware upgrade for the IP adaptor. Have you checked the DSL/Cable service? Do you have QoS on the service? Is the service shared with data? Do you have enough bandwith? What CODECS/compression are you using? You will need to contact your local NEC dealer and get...
  17. austech

    programming softkeys in NEAX 2000 and remote log ons

    The softkeys in the Elite also don't blink, but I don't know about the IPK, I haven't worked on one yet as the IPK was just released in Australia last week. Thanx Jesse PABX Sales and Service
  18. austech

    programming softkeys in NEAX 2000 and remote log ons

    Hi, I hope I can help on the softkey question, the softkey feature doesn't blink when the feature is activated on the IVS2/IPS/2000 pbx's only on the large IMX PBX. The Dterm handsets are the same, but work slightly different. I hope I have used the correct names for the PBX's as i'm an...

Part and Inventory Search

Back
Top