Search results for query: *

<rocap:rou=40; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 40 011000000000001 7 2110000000 30 128 00070715 111000000000 001100 <rodap:rou=all; ROUTE DATA ROU TYPE VARC VARI VARO FILTER RVA 40 TL19...

<scexp; EXTERNAL SYNC RECEIVING LINES DATA MASTER LIM STATUS FIRST CHOICE 2-0-20-0 SYNC RECEIVING SECOND CHOICE NOT PRESENT THIRD CHOICE NOT PRESENT END

I have change VARI at 10040000 but it's all along same.

<rodai:rou=2,type=sl60,varc=00000310,vari=10000000,varo=10040000,rva=000000; EXECUTED <roeqi:rou=2,tru=2-1&&2-15,equ=2-0-30-1; NOT ACCEPTED COMBINAT.EQU VAR NOT ALLOWED

I have MD110 and third office connecting through HDSL modems. Configuration route: ROU TYPE VARC VARI VARO FILTER RVA 2 SL60 H'00000310 H'10000000 H'06300000 NO H'000000 ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 2...

After restart units KLP1T1 and KLP1T2 in 8:34 isn't bad minute time 06 but is 35.

I have small problem with NLOG. Lost call is displayed correctly apart from minute. If minute time is 00 till 06 then hour and minute time is good. But If minute time is 07 till 59 then hour time is good and minute time is 06. For example lost call in 8:09 is 8:06(NLOG display) or 13:45 is 13:06.

I have small problem: < rodde:dest=79; WAIT WAIT WAIT FAULT INTERRUPT MESSAGE FROM OPERATING SYSTEM: RELOAD REQUESTED RELOAD REQUESTED SYSTEM INITIATED DATA < How I fix it?

Thanks for help, already it's OK.

I have BC10.

I have 2 LIMs. At first LIM is number plan good, but at second LIM is difference. Is possible set LIM2 as LIM1? RFEXI don't help.

Is possible adjust route for playing tone for incoming external calls above SL60? <rocap:rou=2; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP 2 012000000000001 4 2110000000 30 128 01151515 111110000030 111111 END <rodap:rou=2...

I have against analog exchange, this is problem with speed...

I possible enter between numbers delay? For example I dialing 9011, Into route is dialing 90, pause(cca 5 sec) and 11.

If you have Dialog3212 or 3213(maybe next), press C*7(all at once and 2 sec), this is melody menu. Here is possible compose ring tones for internal, external and callback call. You must activate relevant button(Line1,2...), next press Programme key and press relevant button and compose your beep...

the one connected to the ext line have SERV D3D4=02, intruding party have 15 PARNUM 68=1

The extension which is connected have SERV D3D4=02

I have BC10(VERSION=LZY2035160/6/BC10CNA142/R4A) and PARNUM 26 and 36 is 1.

Is possible intrusion into route? I have DTS: EXTENSION DIRECTORY CATEGORIES CAT TRAF SERV CDIV ROC TRM ADC CUST LANG 13 01131301 02151201 000140000 000001 2 00100001010 5 and route: ROU SEL TRM SERV NODG DIST DISL TRAF SIG...

I have installed MDAC2.7 and SAM3.5 basic(files version is 3.5.0.0).