Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. cellzdirect

    Bridging not passing

    OK... now I can see MAC addresses of Host A from Host B and vice-versa by ARP. I cannot, however, ARP the MAC address of Router 2 from Host A (or the MAC of Router 1 from Host B, for that matter.) Is that due to the fact that both the Eth0 and Ser1 interfaces of Router 2 have the same IP...
  2. cellzdirect

    Bridging not passing

    Well, that was already set... but good news: I'm halfway there. Seems I forgot to "no shutdown" the ethernet interface (silly, silly me...) [sigh] I can ping from Router 1 to Device A now, due to the newly non-shutdown eth0 interface. (yay!) more to follow, likely...
  3. cellzdirect

    Bridging not passing

    I have two Cisco 1601-R routers with a point to point T1 between them on WIC cards. Router 1 has IP address 192.168.10.11/24 on both Ser1 and Eth0, set to bridge Router 2 has IP address 192.168.10.22/24 on both Ser1 and Eth0, set to bridge Device A has IP address 192.168.10.15/24 Device B has...
  4. cellzdirect

    Setting up Cisco 1601s for bridging over Point to Point T1

    Despite the profuse bleeding from the eyes, I have bridging up and running now. I have another issue, though - (maybe deserves its own topic, but I'll deal with that if necessary.) The T1 crossover cable works on its own - when I unplug to simulate a telco worker tripping on my line, the...
  5. cellzdirect

    Setting up Cisco 1601s for bridging over Point to Point T1

    The address space is separated from the space that generates many broadcasts... I'm not worried about broadcast overhead at all. If anyone could point me to a config anywhere, that'd be great - I don't want to put someone out so they spend the time to write a config from scratch... my eyes are...
  6. cellzdirect

    Setting up Cisco 1601s for bridging over Point to Point T1

    I have two Cisco 1601s and a point to point T1 line between them. I'd like to set up a bridge between them to conserve my allocated IP addresses. I have not touched a Cisco in about two years, and have entirely forgotten what I need to do from the enable prompt. A quick google and tek-tips...

Part and Inventory Search

Back
Top