Search results for query: *

Kurttorok, Here is what the switch is showing when in rom monitor mode: switch: dir flash: Directory of flash:/ 2 drwx 0 <date> yes 3 -rwx 1645810 <date> c2900XL-c3h2s-mz-120.5.2-XU.bin 5 drwx 64 <date> html 6 -rwx 1258...

***Kurttorok*** Ran into the following problem when loading the new image: Switch1#reload Proceed with reload? [confirm] %SYS-5-RELOAD: Reload requested C2900XL Boot Loader (C2900-HBOOT-M) Version 11.2(8)SA2, RELEASE SOFTWARE (fc1) Compiled Fri 24-Apr-98 10:51 by rheaton starting... Base...

***Kurttorok***, Thanks for your detailed procedure concerning IOS upgrade! I will give this a try this weekend. I tried a previous IOS upgrade to IOS 12.x but it did not complete due to not enough memory. I had to do the XMODEM/ROMMON recovery procedure to get the 11.x loaded back. I will try...

Kurttorok, This tread still has life!!! Great idea! Will I need to erase the Visual Switch Manager from Flash? What commands do I use? Rgards, John

Uploaded to latest version of Switch IOS: c2900XL-hs-mz-112.8.10-SA6.bin IOS (tm) C2900XL Software (C2900XL-HS-M), Version 11.2(8.10)SA6 Switch1(config)#ntp ? % Unrecognized command Still no ntp command! Since this switch does not support IOS version 12.X, how do administrators keep the...

I guest the next question is will 12.x fit on my switch?? cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with 4096K/640K bytes of memory. If not, can memory be added to switch? Regard, John

Rburke, Here is more switch info: ********************************* Switch1(config)#ntp ? % Unrecognized command ********************************* Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-HS-M), Version 11.2(8)SA5, RELEASE SOFTWARE ( fc1) Copyright (c)...

Rburke, Thanks for your detail information on NTP commands. It did clear up my understanding! So here is my current router settings concerning NTP: ntp clock-period 17179725 ntp source Ethernet0/1 (Switch is on this interface) ntp master 2 ntp peer 66.243.43.21 (External NTP server)...

NetGun, That worked out great! The image of the switch is now on the tftp server. Ok, I have now acquired a newer version of the IOS for the WS-C2924-XL switch. Can I now just use the reverse of the command to get the new image back onto the switch? COPY tftp Flash:/filename.bin Regards!

MikeS, Ok I think I made the router the master server, but the peer(My switch) still is not getting the NTP time. The following are my current NTP time settings on the router: ntp clock-period 17179725 ntp source Ethernet0/1 (Switch is on this interface) ntp master 15 (The new...

TreyJ, I have both the ntp server & peer cmds set on my router. I am trying to get a 2924-XL switch to sync with ntp time. So far the switch is not updating or syncing time from my router. Is there something on the switch I need to set? Below is what I have set on the my router: ntp...

Baddos, Thanks for the reply! I do have a couple of questions: Q1- the ntp peer command show be made on the switch or router. The switch will not accept this command? The router however will. Q2 - I put the ntp peer xxx.xxx.xxx.xxx on the router, however the switch did not update it's time. Regards!

Is there a way to sync time on a 2924-XL switch to a router or external NTP time server?

How do I download the 2924-XL Switch IOS to a TFTP Server? What console commands do I use? Thanks!!!