Search results for query: *

This is the out put when I ping our default gatway:- ping 10.105.0.2 ICMP Host Unreachable from gateway mol (10.105.10.14) for icmp from mol (10.105.10.14) to 10.105.0.2 ICMP Host Unreachable from gateway mol (10.105.10.14) for icmp from mol (10.105.10.14) to 10.105.0.2 ICMP Host Unreachable...

Hi all, I have a new sun fire T2000 running Solaris10, I'm trying to configure the nic card, but when I try to ping thing all I get is ICMP Host Unreachable from gateway!!. Can any one please HELP and tell me where i'm going wrong. Thanks for any advice.. <><><><><> ifconfig -a lo0...

Hello all, I need a bit of advice I've been ask to investigae patching multiple solaris servers at present all we do is download the latest recommended patch clusters and patch them. What I want to do is to patch multiple servers with different solaris versions from a central server location...

Hello All, I have a little question can I mirror the root disk using sun volume manager when the disk are different sizes. The current root partition is 72GB and the disk I want to mirror to is 146GB. Thanks Steve

Hello all, I have a v120 and I want to configure the lom port for remote managment/console the same way we do for the V240 which uses alom. Is this possible, Ive connect a serial cable to the lom port and I can get the lom prompt, but I can see any where to configure an ip address in the same...

The problem has been resolved apparently the newwork guy lied there was a problem with the port on the switch. sorry to bother you guy's but thanks for all your help McQueen

Thanks djr111, I'm am pinging the system from the same subnet, I can get to other systems at the same location I just can't get the this particular system. And elgrandeperro i'll try snoop and let you know.

Hello all, I'm having touble connecting to a sunfire V880 server I can't seem to ping or telnet using IP. I can't get to the console as the box is in a remove office. I've got a user to check if network card using the ifconfig -a command and the connection is up and running (So he said). I also...

Thanks Guy's i'll check them out

Hello All, I currently system admin to 4 Solaris box, as there was only four boxes all the monitoring I did was just logging onto each box and check over the systems (message log disk space etc). But now we've been taken over by a new company and there system admin has left and now I has...

Thanks Ken, Changing the /etc/inet/ipnode worked and when I did a reboot it came back with the correct ip address, but it had the wrong netmask and broadcast address???. What else have I missed this it the only Solaris10 box I have?.

Hello all, I'm trying to change the ip address of a V445. I've done the following :- vi the following files and entered the correct details:- /etc/hosts /etc/defaultrouter /etc/resolv.conf /etc/netmasks Then I did:- ifconfig bge0 'new ipaddress' netmask 'new netmask' broadcast 'new...

Thanks to everyone who help me out with this one all is working now with all your help. Once again Thanks

Thanks for the reply sorry for getting back to you so late. I'm not sure what you mean when you say disable/enable ip forwarding. I've configured the other nic card ce1(Netmask 255.255.128.0):- lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1 inet 127.0.0.1...

Hi All, I have a Sunfire V440 with solaris 9 installed. Currently there is one nic card configured and all working ok, but now they want the other nic setup and both card to work seperatley. I have been asked to make sure that there is no brigeding between the two cards, But I'm sure how to...

Hello All I've changed my ip address from 198.80.185.7 to 10.28.0.1 using the following command ipconfig ce0 10.28.10.1 netmask 255.255.128.0 broadcast 10.28.127.255, I've also edit my /etc/hosts file my resolv.conf and my /etc/defautrouter file and rebooted the system and all's fine. but when...

Hello all, I've just renamed our media server and chaneged the ip address. Now I can't start backup exec 10d Error 1068 the dependency service group failed to start. So I decided to try and uninstall & reinstall backup exec. but still no luck, I can't uninstall or reinstall i'm stuck. My...

Hello all, I'm trying to setup a samba share but I want the users to have to type in there username and password. As a test I'm using myself I have a login and password and I can login and access the servers. But when I share my user area and try to browse to it via a windows PC the username...

Hello all, What the best way to copy file from one disk the another while still keeping all the time stamps file and directory attributes. Thanks for all your help.

Hello all, I'm trying to move a large amount of data from one disk to another, I thought I'd back it up using ufsdump and restore it using ufsrestore so I keep the time stamps. Is there a way i can do a backup and restore without putting it to a file or tape?. Basically a disk to disk backup