Search results for query: *

I just built a 3903 set, no features, scr on key 0 that is not on any other set. I get the same thing, when dialing that extension and it is busy. put in number to charge. I think I have a bug in the switch. Mark

And yes key 0 is on other phones. Mark

It is a system wide problem when dialing a 3903 set from a 3902,3903,of 3904 set. After I did make a change in the rdr data, now you get a busy signal but the display says put in number to charge. The 3903 sets do not have voice mail, just multipal scr dn's. The 3903 sets that have voice mail...

John, I made the changes in the switch, and it's still doing the same thing. Mark

John here is the RDR Data Thanks Mark REQ: PRT TYPE: RDR TYPE RDR_DATA CUST 0 TYPE RDR_DATA CUST 00 OPT CFO CFRA PVCD CWRA FNAD FDN FNAT FDN FNAL FDN CFTA YES CCFWDN CFN0 4 CFN1 6 CFN2 10 DFN0 4 DFN1 6 DFN2 10 DNDH NO MDID YES NDID YES MWFB YES TRCL 0 CRT0 00 00 00 00 CRT1 00 00 00 00 CRT2 00...

John, Thanks for taking a look. Mark DES 5702 TN 015 0 00 00 TYPE 3903 CDEN 8D CUST 0 FDN TGAR 14 LDN NO NCOS 4 SGRP 0 RNPG 0 SCI 0 SSU 0100 LNRS 16 XLST CLS UNR FBD WTA LPR MTD FNA HTD ADD HFA GRLD CRPA STSA MWD LMPN RMMD SMWD AAD IMD XHD IRA NID OLD VCE DRG1 POD DSX VMD CMSD...

I have an Option 11 with 3902,3903, and 3904 sets. If you dial an extension with out voice mail and it is busy, there is dead air and the display on the set says the name of the extension dialed for a few seconds, then it says put in number to charge. We do not use any account codes and they are...

Bob, That is what they are doing now, but the clinic manager wants them to transfer to the ext. That is how it is done the other clinics. They want everything on the same platform. The other clinics have Modular ICS systems. Thanks for your input. Mark

I have all the lines appear on all the sets, but only ext. 21 rings.

Yes that is right I want to transfer a call to a station on a 3x6 DR1. If I d0 feature 3, I get a message make call first. Mark

That did not work, Do you know where I can purchase the books for a 3x8 DR1. I have looked on the net and can't find any. Thanks Mark

Thank you for your time, I will give that a try. Mark

I will give that a try, What is feature 9? I don't see it listed on the feature codes. Mark

When doing feature 70, I get invalid code or something like that. I have not tried 3,or 74. Mark

I am trying to transfer to another station. Mark

Is there anyway to transfer a call on a 3x8 DR1. Feature 70 will not work. Thank You Mark

Well first of all to turn off the message light Lift the handset Dial 1#1 Dial 0 Hangup. This could be on because some one was messing around and sent a silent message Hope this helps. Mark

We are using Office Watch from Metropolis Technologies, INC on a Series 3. Works very well and intallation was painless. Mark

we have a office building that needs caller ID block, to prevent people from calling back on line pool numbers and bypass the auto attendant. I was successful on setting up the feature 819, and was going to program a button on the sets for that. But it will only work on the sets that use a line...

On our old SBCS II pbx we had serveral extensions with three or more two line phones. When we installed the Series 3,we had problems with line lights staying lit when the extension was not being used, and any more than three two line phones on an extension, the phones would only work on one line...