Search results for query: *

Thanks jneiberger, I really appreciate your response.

Thanks jneiberger for this effort, actually I am aware of what you have mentioned (but may be my question was not so clear) I was looking for this: Configuring Bridging http://www.cisco.com/univercd/cc/td/doc/product/l3sw/4908g_l3/ios_12/7w515d/config/bridging.htm#wp1019871 The link shows me...

While I was reading through some documentation I found this : " When a router is routing IP, an IP broadcast will never be forwarded from one interface to another by default. An IP broadcast can be forwarded between interfaces if the router is transparently bridging, but will not be forwarded...

I am looking for some good resources show me how to setup be VPN session between a dailup Desktop (XP) at home and Laptop (Win2003) connected to ADSL router (WAG54G V2)at home as well (i.e I have two type of connections Dialup and ADSL). I am looking for resources for all these requirements...

I have got two computers at home, my laptop (win2003) connected to ADSL linksys WAG354G (wireless not wired) , and I have got a Desktop PC connected to noraml Dialup modem, I tried to establish VPN between them , by using microsoft client utility on the Desktop PC, but I faild to open the VPN...

I have got chance to check cisco curriculum,it showd me source DLCI not destination

http://img89.imageshack.us/img89/4172/framerelaydlci7nl.jpg What is placed in the address field of a frame that will travel from the DC to Orlando office? Is it DLCI 200 (which I beleive) or DLCI 200 and DLCI (100)?

I have already tried this without any success.

I have got windows 2000 advanced server , I created a user and when I tried to click on "member Of" tab, I received this error message: See the link please: http://tinypic.com/fozwgy.jpg I found this link, but I did not play with it , because it is dealing with registry...

I just want to know in general, does a telecommunications switch can handle different layer 2 wan technologies (Frame Relay, ATM, ISDN--etc)? or it should be specified for specific technology only ? Yes I know there are different modules and type of switches, but I am looking to know does it...

With Hub and spoke topology, If R2 is hub and R1, R3 are spokes,,,,and if the question ask : 1- Configure OSPF area 0 on the Frame Relay connection between R1, R2, and R3. 2- Do not use the "ip ospf network" interface command on R2. The task above states that the "ip ospf network" command...

Internetwork Expert Lab for CCIE says: "Another two configurable network types that are left are therefore point-to-multipoint and point-to-multipoint non-broadcast. Point-to-multipoint non-broadcast is used in NBMA environments with virtual circuits of differing speeds". Cisco says...

Any help. To be able to ping my router remotly I have to disable (by default it is enabled) the protection under Firewall section ((Protection: Enable Disable Block Anonymous Internet Requests)) ---->I have to tick or untick Do I need to enable ping (expose the network) first to be able to...

I have got LinkSys Router WAG354G (not WAG54G) at home , I have got the mail server with static ip address 192.168.1.64, and the web server with static ip address 192.168.1.100 If I want to access these services from the internet, I have to configure port forwarding, but with my Linksys I have...

See this : http://www.dslreports.com/faq/4042

Dear All I tried to follow the instruction in this link: http://multiboot.solaris-x86.org/v/2.html I created all these partitions as mentioned in the link above by using partition commander 9 Fist stage: I installed XP in first partition (hda1)....success. Second stage: Install...

Hi All Regarding to this article: http://support.microsoft.com/kb/816514 The article mentioned: Build a Filter List from NetA to NetB 1. In the new policy properties, click to clear the Use Add Wizard check box, and then click Add to create a new rule. 2. Click the IP Filter List tab, and...

I divided my 40 GB HD as followed: 3GB primary (Win XP), 4GB also primary unformatted to be for Solaris later on, 32GB primary Extended .I had done partitions by using software Magic Partition I succeeded to install Win XP and Linux, the boot Loader is LiLo. First I installed Win XP, and...

Hi oaa005 I had the same problem.and I have asked many question about this problem "How to configure your modem with Solaris OS". But I did not receive any answer .....I have got two operating systems on the same PC first one is win2000 and second one is Unix Solaris8 ....I try to...

Hi SteelBurner I relized by tring that if there is no cable plug in your NIC crad and you try to ping localhost then you receive this message "destination Host Unreachable" that if you have w2k, or w2k server and winME......but with windows 98 there is no problem. or some time the...