Search results for query: *

Thank you. That worked!

I am having a problem setting up the Merlin Magix system to make calls out over a PRI line. I now have a functioning PRI line and can successfully place and route inbound calls using Routing by Dial Plan, but I cannot call out. I have assigned 22 of the Lines to a pool (890). After I assign...

I set LinesTrunks-->PRI-->B-ChannlGrp-->NetworkServ = to DMS-100Local and DMS-Outwats and that brought the D-Channel up. Now I just need to figure out how to get the B-Channels all online. The first channel is up, but the rest are still down. By the way... thanks for all of the help!

Ok, I got a new board and I have the same problem. We even switched it back to DMS-100 to try that again. The SwitchType is now set to DMS-100 on the DS1 card. Maybe the Channel Unit Selection is wrong... I have Foreign Exchange selected. Should it be Special Access? Or maybe the...

TEI is set to 0 on both sides. I tried running the tests and it seems to be working ok, but I might be missing something. I am going to get a new card and try that. There are 2 other errors... INVALID SANITY RESPONSE and COMMAND BUFFER FULL. But the errors are not as consistent as the PRI...

Thanks for the reply... Those are the settings I have, and the telco carrier set the switch to 5ESS and it still isn't working. Any other ideas?

I am currently trying to install a PRI line on a Magix R2.1, but I am having trouble getting the D-Channel to work (PRI D-CHNL INOPERATIVE). The phone company setup the switch as DMS-100 and NI1 and we tried 5ESS as well, but it still doesn't work. The carrier comes up and we can get the line...