Search results for query: *

OK there's definitly something wrong with sdb... Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util sdb 3.26 1005.29 0.03 8.06 0.01 3.96 1004.23 3.97 485.04 122.39 99.08 sdc 1512.55 1014.82...

OK todays problem. I have a HP N54L Microserver running centos 6.5. In this box I have a 3x2TB disk raid 5 array, which I am in the process of extending to a 4x2TB raid 5 array. I've added the new disk --> mdadm --add /dev/md0 /dev/sdb And grown the array --> mdadm --grow /dev/md0...

Does anyone have any experience of running a legato backup server inside a Solaris Container? It seems like a bad idea to me but it's being suggested and I'm looking for some detail or experience either way.

Answer here. https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1008147.1 They suggested option 4

We had some SAN disks go to "Needs Maintenance" mode. When checked they are ok, SAN software says so. So we need to do a metareplace, but this box is set up with single disk mirrors. d415: Mirror Submirror 0: d416 State: Needs maintenance Pass: 1 Read option: roundrobin...

How do I rebuild the CFI The scanner didn't do it...

That's what you'd think but they aren't both as Solaris 10 servers is are the backup server. Strange Huh I thought it might be something to do with the fact that it's a DB2 backup and no a filesystem one???

We are attempting to recover a DB2 instance for DR purposes. We have a tape containing a full backup from another networker setup. We have scanned in the tape, but apparently the scanner cannot rebuild the file indexes of DB2 backups so a browse restore from the client cannot be used, We've...

As the title really we've had a request from the SQL DBA's to verify the SQL backups from a script. They are looking to use the verifyonly "method" from SQL server which appears to be available from the GUI but not via nsrsqlrc. Is it not available or not possible or anyone have a nice hack...

Thanks for that I figured it was along those lines... Also why is it that any client side backup I run using either save or savepnpc shows as it's level as manual in mminfo

I'm trying to run a client side backup from a Solaris server. The command is /usr/sbin/savepnpc -vvv -s $SERVER -g $GROUP /oracle/backup/$SID_NAM/_files This runs fine as root but errors when run as oracle... 32476:savepnpc: Unable to run preclntsave for group LIMSDaily successfully, see...

Yeah that's my worry. There's a lot of entries on the grid control configuration that goes on about sudo configuration, but nowhere can I actually find any information on what oracle requires that to be within Solaris...

I'm helping out on a 11g install with grid control and I've been told that we need to configure sudo to allow oracle to run root scripts Does anyone have any doco on exactly whats required as currently we've allowed the oracle user to switch to root and run anything which is not the greatest...

I got the answer from else where I didn't escape the $ my bad...

I'm obviously missing something here... I have a script to change the backup command #!/bin/bash nsradmin -i - <<EOF . type: NSR client; name: maitprodsql1; group:SQLLogs; save set: "MSSQL$TESTSQL2005:DR_TEST_DB_Test1" update backup command: "nsrsqlsv" EOF which gives me this output...

Is that the res files on the client or the server??? I've been looking for the client id on the client and I cannot find it.

I thought of that any idea where to get it from though???

I have a client that has lost it's indexs, The story so far on Monday Morning I noticed the client wasn't backing up, I looked at the logs and client config and discovered that it had no Client id. I restarted the server and it then had a client id and would now back up, but it had no history...

I'm sure I'm missing something but I have no idea how to do this, We have had some files go missing across a file system last week... I know that the system was ok on Thursday so how do I test what we currently have against last Thursdays backup? I have ideas but they all seem to complicated...

I there a way to query a running saveset. I've 3 large > 2TB savesets that are still running and I want to try an see where they are... The issue is that the savesets are subsets of each other and with excludes using +null and they appear oto be too big... ie. saveset 1 is c:\data saveset 2...