Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. andy92

    NEC NEAX 2400 SDS MAT

    Hi belevedere & OzzieGeorge Thanks for the advice. I already visit Link as belevedere suggest to me, and I found NEC NEAX 1400 IMS is very similiar with NEAX 2400 SDS, from the machine & the cards itself. I'm very happy about that, and right now all of my problems already solved, The PABX...
  2. andy92

    NEC NEAX 2400 SDS MAT

    Hi belevedere Thanks for reply. I already visit that website. i found nothing for this type of PABX. do you know something how to assign the cards mounted on the PIM with MOC command?
  3. andy92

    NEC NEAX 2400 SDS MAT

    Hi belevedere. Thanks for your reply. I already knew about it, do you have the command list of the MOC or DOS MAT for easier programming?
  4. andy92

    NEC NEAX 2400 SDS MAT

    Hi OzzieGeorge. Thanks for the advice.
  5. andy92

    NEC NEAX 2400 SDS MAT

    Hi OzzieGeorge. Thanks for your reply. only few things i only now about MOC command. assign station number CM10>[LEN]>[NUMBER TO BE ASSIGN] specify maximum number of digit CM200>1>803 (means for ext number with leading number 1 will be using 3 digits - 100) CM200>1>804 (means for ext number...
  6. andy92

    NEC NEAX 2400 SDS MAT

    Hi OzzieGeorge. Thanks for your reply. I have no backups, i can't find any floopy disk around my office. i have been tried my best using MOC to talk with the machine which is input hexadecimal codes. you're right it's very unconvenient way to do this, for example if i wanna to change the station...
  7. andy92

    NEC NEAX 2400 SDS MAT

    Hi belevedere, Thanks for reply. very old model NEAX 2400 SDS released in 1988 using ms-dos MAT.
  8. andy92

    NEC NEAX 2400 SDS MAT

    Hi, I have a NEC NEAX 2400 SDS installed at my company, the problem I had this PABX has been reset to the default settings because the battery cable of the memory card was disconnected, anybody here have the 2400 SDS MAT software for me to reconfigure this PABX again? Thank you in advance.

Part and Inventory Search

Back
Top