Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Koolcom

    Hipath3800 Audiocode

    Yip I'll try that next week as this customer is 300km away, but any other ideas are welcome Thanks The Kool Guy
  2. Koolcom

    Hipath3800 Audiocode

    Hi Yes I am aware of that but I'm a 4000 Tech not 3000 so there must some settings that I have missed. The BRI works perfectly to the Telco Company via a ISDN NTU but not to the Audiocode. A PRI works perfectly with no tweaking on the 4000, I gather it is a mismatch somewhere in the config of...
  3. Koolcom

    Hipath3800 Audiocode

    Hi All Any ideas will help me to get a Hipath3800 BRI port to work to a Audiocode Mediant800 Gateway. I have tried all the protocols in the 3800 Trunk setup, but on the Audiocode they are getting a D-Channel error. Protocol on both ends is S0 Euro ISDN PP I have attached the KDS file TIA The...
  4. Koolcom

    AcWin-IPV3

    wev'e tried that microphone setting in windows no luck we have asked the IT-Dept to trinstall Windows for us then we will install AcWin/DsWin again Thanks for all the input guys The Kool Guy
  5. Koolcom

    AcWin-IPV3

    Thanks Will try that The Kool Guy
  6. Koolcom

    AcWin-IPV3

    Will give it a try but only next week need to liaise with IT Department not our PC's Will update with findings but thanks for the input so far The Kool Guy
  7. Koolcom

    AcWin-IPV3

    Maybe I didn't mention it above but it is a STMIX and Acwin-SL V3 and it was a working AcWin then the SoftOla error started and I did a reinstall same issue even with another copy of AcWin-SL The Kool Guy
  8. Koolcom

    AcWin-IPV3

    Yes I have logged on as administrator Yes the changes are reflected in AcWin Config The Kool Guy
  9. Koolcom

    AcWin-IPV3

    Yes I did that and it shows in Ac-Win Config that the handset is there but when you restart AcWin again you get the SoftOla error message indicating that the handset is not set in Ac-Win Config The Kool Guy
  10. Koolcom

    AcWin-IPV3

    Compliments of the Season to All AcWinIP-V3 won't connect getting a SoftOla error that the sound settings has not been configured however the following has been done 1. Swopped Handset 2. Moved Handset to another USB port 3. Checked sound settings in Control Panel 4. Reinstalled AcWin...
  11. Koolcom

    SLK- Keymodule

    Thanks Akineo But the customer says they always use SLKNAME and the DSS wasn't there before, that's why I'm asking is this normal that it will always show DSS then NAME or is there a setting somewhere to remove the DSS The Kool Guy
  12. Koolcom

    SLK- Keymodule

    Good Day Is there a way of removing the DSS label from the SLK after adding ZIEL with the param SLKNAME. The name in PERSI is displayed with the DSS in front of the name. "DSS JOHN SMITH" instead of just "JOHN SMITH" ( Openscape V8 R2.22 ) The Kool Guy
  13. Koolcom

    OS4K V8 CLI

    Thanks for the Feedback The problem is it's Nurses stations that are barred permantely but on some occasions they need to make a call. Then switchboard does a blind transfer and if the called party does not answer and they return the missed call it goes to the switchboard instead of the nurses...
  14. Koolcom

    OS4K V8 CLI

    Thank you for the prompt feedback I had a inkling that there would be no fix to get it to work for ithe customer The Kool Guy
  15. Koolcom

    OS4K V8 CLI

    Hi All I have a customer that is quering why when a barred extension dials the switcboard to be connected to a external number, the called party gets the main number as CLI and not the extension number. I have tried various cot parameters on the outbound trunks has anyone had this problem...
  16. Koolcom

    Hipath Manager V7

    Thank you very much Moreindi The Kool Guy
  17. Koolcom

    Hipath Manager V7

    Hi Moriendi Yes please any info you have will do and we have generated a new licence file The Kool Guy
  18. Koolcom

    Hipath Manager V7

    Hi Guys I'm looking for some documentation on how to install Hipath Manager V7 on a Virtual Machine the Cisco-Server has crashed and the customer has provided a VM. The Kool Guy
  19. Koolcom

    CSTA Passive call Recording

    Hi I found a old document connecting to Datavoice hope the attachment is helpful The Kool Guyhttps://files.engineering.com/getfile.aspx?folder=aa849fa4-38a6-4959-8c79-1e71bd3fde32&file=4006-0013-01_Datavoice_Setup_with_CAP_&_CSTA.doc
  20. Koolcom

    Hipath 4000 _CLI to Service provider

    Hi The AMO is sdat see example below just follow the prompts for your system and PUBNUM must be configured in LDAT CHANGE-SDAT:6394,DATA1,130,,27474016394,NATIONAL,ISDN,,,,,,,,,,,,,,SECURE,; ADD-LDAT:99,ALL,1,,99,99,1,,1,EMPTY,WCHREG&PUBNUM,99,4,,,,,,,,,,,,; Hope that helps The Kool Guy

Part and Inventory Search

Back
Top