Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Replacing OPX lines
No change, we set this to NO several weeks ago- UnklBuddy
- Post #15
- Forum: Nortel: CS1000 (Meridian) systems
-
Replacing OPX lines
We have found, with a lot of testing, if I go off-hook with a monitoring test set, The CS1000 will immediately dial the digits. As if it were not seeing the correct termination Impedance. i.e.: Press the PVR, dial digits, CS1000 phone Dialtone goes away. The dialtone is still present on the...- UnklBuddy
- Post #13
- Forum: Nortel: CS1000 (Meridian) systems
-
Replacing OPX lines
I have learned that 138 is for UK, 014 for USA- UnklBuddy
- Post #11
- Forum: Nortel: CS1000 (Meridian) systems
-
Replacing OPX lines
DTMF=014, in XCTP LD 97- UnklBuddy
- Post #10
- Forum: Nortel: CS1000 (Meridian) systems
-
Replacing OPX lines
I will check on the can you please prt in LD 97= XCTP (should be DTMF=138) Since this is working with true OPX lines from a CS2100, the local TECHS are not very friendly to changes- UnklBuddy
- Post #9
- Forum: Nortel: CS1000 (Meridian) systems
-
Replacing OPX lines
What I have figured out, no one else has done this-- YET. Hopefully the other guys go to Avaya or Cisco and then we can setup a SIP trunk between us to solve this.- UnklBuddy
- Post #5
- Forum: Nortel: CS1000 (Meridian) systems
-
Replacing OPX lines
I did try polarity as one of the 1st things. I have asked the local TECH to add SUPERvision. The SPCT is IMM. TYPE RDB CUST 00 ROUT 31 DES TKTP COT NPID_TBL_NUM 0 PRIV YES SAT NO RCLS EXT VTRK NO DTRK NO ISDN NO PTYP ACO CNDP UKWN AUTO NO ICOG IAO RANX NO TRMB YES STEP CPP NO TARG 01 CLEN 1...- UnklBuddy
- Post #3
- Forum: Nortel: CS1000 (Meridian) systems
-
Replacing OPX lines
We are attempting to replace 5 OPX lines on a CS1000 (Option81). We are coming from a Cisco Call Manager release 10.5 We have 2 VG204 units tied to Cisco to XUT card, the inbound calls work just fine. The outbound are not pulling dialtone properly from the VG204 units. IF I go offhook on the...- UnklBuddy
- Thread
- Replies: 14
- Forum: Nortel: CS1000 (Meridian) systems
