Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. toppmoeller

    RPN in HiPath 4000 Expert Access

    hello switch off your device , then switch it on again keeping down 147 on diplay you'll see SERVICE now type 76200 set the flag corresponding to "metering mode" switch handset off and then on you'll see in the first line several numbers: the first one is the signal strenght, the second is...
  2. toppmoeller

    HG CARD CONFIGURATION THROUGH WBM IN HIPATH 4000 VER 6

    you have to type https://ip address of the board user TRM password HICOM otherwise you can access with hipath assistant expert mode dashboard and you can find the list of the boards then you can find wbm to hg35xx
  3. toppmoeller

    OSCC v8.0 CSTA confihuration for Hipath 4000 v 6.0

    i'm sorry my reply was for another post
  4. toppmoeller

    MWI Announce in Analog Extensions

    it's provide by the h4k and you cannot modify this message if you don't want it you have to check cos and mb parameter. let me know if you're running this analog stn with slmae board and if the device has the mb key
  5. toppmoeller

    Tracking on Base Station

    the only way if i remember well is using hipath manager and performance management but not sure about this let me check.... no you can find only slc SIEMENS HiPath Cordless Stays per Extension stn orig nodeand pen visited node visited slc 68001 MXP3 1-4-103 MXPN 1-3-103 01:38:00 23.0 Yes...
  6. toppmoeller

    OSCC v8.0 CSTA confihuration for Hipath 4000 v 6.0

    solved. csta on h4k provides 4 connectivity adapter with 4 pre defined ports. for blf cap in needed but i can use the pre configured cptp,xappland acmsm.
  7. toppmoeller

    remote access in hipath 4000 version 6

    with a vpn or with isdn and allied telesis configured in this way http://www.tek-tips.com/viewthread.cfm?qid=1706662
  8. toppmoeller

    Caller ID with Hipqth 4000

    this is not reaaly true. it depends from the phones you're using. there's some thyrdy party phones that show also the calling name in amo persi. i try some times ago some analog phones provide by gigaset with external power supply , and i can read the call id stn and persi name
  9. toppmoeller

    h4k v6r2 csta and blf-win

    Hello , i'm trying to test blf server and client installed on the same machine with ac-win ip v2 and an old Cap v3.0 with this new h4kv6 we have an internal csta. we know that this new version provide an acl-c link by default using appl 5-25 (acmsm 55 , xappl 55 and so on), i suppose this is a...
  10. toppmoeller

    Problem with VEGAS AMO

    sta-del:":pas:vegas/datei";
  11. toppmoeller

    Hipath 4000 V6.0 remote ISDN & analog

    unfortunately there's no analog modem officially released. so you have to use an internal stn with stmd board. about the configuration of this router , i think you're talking about 415s There’re two way to connect with h4k v6 1)inside the customer lan (you can reach Portal , Assistant ,rmx...
  12. toppmoeller

    hipath assistant Emergency Password Reset

    ok thanks for your reply
  13. toppmoeller

    Meditrix 4102S connecting to HiPath 4000 V5 with HG3530

    ok but you're running on h4k v5 so keep in mind the opportunity to use your hg35xx as hg3530 and sip as common gateway
  14. toppmoeller

    hipath assistant Emergency Password Reset

    really?? so everything is useless? i found this on the service manual and now loosing my stuff reading this chapter i follow it step by step and the result is always the same: Error message: Invalid attempt 2.6 Emergency Password Reset (EPR) Emergency Password Reset (EPR)...
  15. toppmoeller

    hipath assistant Emergency Password Reset

    Hello all, does anybody try to use this service available from public area of the server ? i'm trying to use it on v4 but there's something wrong with my step by step action.

Part and Inventory Search

Back
Top