Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. gaibut

    Changing 1001 RP to another 1001 RP

    I have a issue with a power slot in a 1001 RP, I have known good power supplies.I have another 1001 RP that was previously loaded with 1.07.Should I have any concerns if I move all 6 drives, raid controller, cpu to new 1001 RP.Mother board same on both 1001 RP.
  2. gaibut

    cinphony initialize engine

    I have seen all the cinphony threads , I am wondering has anybody found the fix to this issue, or did cintech help
  3. gaibut

    Cinphony reports

    I see in the infocus when pulling data from cinphony i can see packet, how ever the report's that are coming up are from 2 years ago, do I need to start anything in infocus server?...also intialize engine comes up when trying to produce reports, ran chkdsk and show file allocation errors in...
  4. gaibut

    1001 RP drive replacement / rebuild

    Trying to replace a dead drive at scsi 1 / 5, found drive that will come on line but when trying to rebuild the dac960 raid software comes back and says wrong device. Using the documentation that I have from Nortel it says to click on the drive you have replaced. But the example shows drives 0...
  5. gaibut

    smi workbench client software

    Is the client software on a separate CD or can I pull off a copy from the symposium express server?
  6. gaibut

    Option 11

    LD 22 PRT ISSP
  7. gaibut

    Call Pilot 5.0

    That sounds like a great idea to remove the tape drive , unfortunately I do not see it currently
  8. gaibut

    Call Pilot 5.0

    Call Pilot cannot complete backup, cannot see Tandberg SLR75 External Tape Drive, I remember a bulletin on this issue about a bad scsi cable , any ideas?
  9. gaibut

    You Know Your A Nortel(Avaya) Tech If

    When you report Health Maintenance issues to your customer , only to be asked " Has the end user reported any issues ? ",and then your customer ask the question, " Why should I out the 300 disabled sets in the PBX ? "...
  10. gaibut

    Call Pilot 1001RP 2.02

    Thank you for your response, might be tough to get 25.30 patches, but I can certainly take away load 30..
  11. gaibut

    De-commision Call Pilot procedures?

    what type of call pilot do you have?
  12. gaibut

    Call Pilot 1001RP 2.02

    I just reloaded software on a 1001 rp, everything is working fine, except at midnights the MGate card disables and I get a error message CDN003 , default application, I will soon add latest updates SU05 and will change NIC card to half duplex and 10bps..currently set to auto.If this does not...
  13. gaibut

    Call Pilot Keycodes

    If you have a Call Pilot can it be moved to another site were the Serial numbers do not match the PBX. I believe there was a issue with Meridian Mail matching but not sure with Call Pilot. I have a site were I have a good 2.02 1001RP Call Pilot but want to move to another site that has a down...
  14. gaibut

    Norstar 5.0 System

    There is no caller id for system and no voicemail
  15. gaibut

    Norstar 5.0 System

    When a user is on line one and they recieve a intercom call to that set it will not display or change lcd on set. If the caller hangs up and calls again when the user is still on line one then it will display and let user know who is calling.I have tested this on different releases of Northstar...
  16. gaibut

    LDAP LIMIT EXCEEDED

    I needed to reload software on a Call Pilot 2.01 1001 RP, everything was going great until I went to complete with Config Wiz and could not load language CD's, came back with LDAP Limit Exceeded error 4... Looked in all workarounds, for this issue looking for other ideas...
  17. gaibut

    MICA Transfer to ACD , has 1 way transmission after 10 minutes

    Original report that calls cut off after 10 minutes.After tracing calls and speaking to agents what happens is calls from MICA card will go to Sympossium and after agent call is established the call will look like a cutoff however the agent cannot be heard, at that time they will place call and...
  18. gaibut

    msdl0457_option11c freezes

    Your input has been helpfull, I have changed the OTBF prompt for adan's to up the buffer's, rolled TMDI card's to see if the error's change, will keep you posted. If I remember correctly, there were no d-channel message at the time of the berr code, and I cannot tell you how many time's I have...
  19. gaibut

    msdl0457_option11c freezes

    I have checked to see if D- Channel messaging is turned on, is this what you are referring to, can you be more specific, or is this something that I need to ask my telco vendor?...
  20. gaibut

    msdl0457_option11c freezes

    thread798-1596312 I am having same issue and have looked at all threads concerning this issue. I have a Option 11C , 25.30 ...3 expansion cabinets.I have replaced SSC card and problem was not resovled. I am currently trying to do a new install and replace software daughter board with new SSC...

Part and Inventory Search

Back
Top