Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. MightyGorilla

    SX2000 CNAM Pass Through PRI

    Follow up: After finding out that the CSS trace command existed (CSS TRACE ENABLE CONTINUOUS), I placed some test calls that came in the main PRI and right back out the other PRI to Asterisk. From what info I've been able to scrape together, apparently the caller name is transmitted in a...
  2. MightyGorilla

    SX2000 CNAM Pass Through PRI

    A little picture of our setup: PSTN --> PRI --> SX2000 --> PRI --> Asterisk There are handsets/extensions on both PBXs. With the help of the users of this forum, we have caller ID "flowing" between our SX2000 & Asterisk server. If I dial from an extension on the Mitel to an extension on...
  3. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    If a DN is not in the CPN table and the Default CPN is configured then the default CPN will be sent for that DN." -That's right. I didn't state it clearly, but what I meant was, you HAVE to populate the Substitutions Form to get the card to output digits (whether they are specific or the...
  4. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    Thanks for everyone's help - these problems are resolved. In review: The 3 digits that were absorbed by the PRI card were related to the "Per Call" setting in IMAT as kwbMitel said, which apparently is the default. The calling party ID not being passed on outbound calls was pretty confusing...
  5. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    Thanks for the info, but this still isn't quite clear, so let me rephrase a bit. For example, I have entered the following into the CPN Substitution list: Default CPN: 1234567890 DID Substituted CPN 1234 1234 5678 5678 Is this our only way to get the CPN passed...
  6. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    Well, I got a copy of IMAT, and found the second port on the card was completely unconfigured (most fields were set to null). After the basic settings were configured, it stopped absorbing the first 3 digits, and I was able to set the CPN substitution list so that the card outputs the caller ID...
  7. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    I created a digit modification plan to absorb no digits and insert 000 and assigned that to the route - but this had no effect on the caller ID. It is still blank. It did "fix" the stripped digits issue on the dialed extension in a hacked sort of way by just inserting some sacrificial digits, so...
  8. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    I had a coworker run the option +dispcall command on the PRI card and perform some test calls. When dialing from extension 7795 on the Mitel to extension 3660 on Asterisk: >>>OUT: 10/04/15 12:13:39 @ 0 When dialing from extension 3661 on Asterisk to extension 7795 on the Mitel: >>>IN...
  9. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    I'm on the road for a week, but thanks for the info, and I'll post back my findings as soon as I get back to the office.
  10. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    The diagnostics logs on the server show only the 4th digit + being passed in. Furthermore, I'm not aware of any DAHDI configuration options that absorb digits. The entire dialed number is passed into the dialplan via ${EXTEN}, and if you want to ignore the first 3 digits and use the next 4...
  11. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    Thanks for the info SXWizard, Unfortunately, that leads to some follow-up questions:) I've already created a Digit Modification Number (2) with 0 digits to absorb and no digits to insert, and assigned that in Route Assignment to my route. Is there somewhere else this can occur? I don't have a...
  12. MightyGorilla

    SX2000 Absorbed Digits and PRI Outbound Caller ID

    We have a mostly-functional connection between our SX2000 and an Asterisk box, but I still have 2 problems: 1. The Mitel is stripping 3 digits from the extension number before passing it out the PRI card, and I haven't been able to locate where this is configured. 2. Calls from the Asterisk...

Part and Inventory Search

Back
Top