Search results for query: *

I havent used CW2K in about 3 years (old job) I can't remember if CW2K VLAN manager could export reports on vlan utilization. Basically I have 100's of VLANS over hundreds of switches. I need something that will show weither or not there are too many ports assigned to a vlan. Also whither those...

That one didn't help. However, I opened windows explorer and typed in a url and was able to open IE that way. Then after closing explorer.exe the direct open link to iexplore.exe started working again. Bizzaro. I definately have a bug though. A program, %sys%\winnt\speech\task.exe keeps...

First let me say that I have seen little peices of this problem in other treads but it was never completely awnserd. Also, this is NOT the Invalid pagefault in shell32.dll error that is addressed ad nausium on Microshaft KB. Also....I had fixed this exact problem about a year ago and can't for...

OK I went to MyCitrix site and it shows: MetaFrame XPe 1.0 For Windows ### MetaFrame XPe Connection License Pack #### As activated in the "Re-activate or View license" section But when I click on "Review Fulfillments" I don't see any in XPE, FR1 or FR2. So now there is...

I have the same problem. If I dumb down the servers to FR None I can connect. What is wierd is when I look at the License aplett (when servers are at FR2) I can see 2 pooled licenses for FR2 but zero connection licenses AND above I see 2 pooled licenses for severs and 40 connection licenses...

They are c2924M's with x2931 gig mods and 1000SX GBICS. IOS is 12.0(5)WC3b which is pretty current. Actually, I got it to work about an hour after my post. I used to have a problem with giga stacking 2924Ms where if I added a switch to the stack or replaced a x2931 mod users would loose...

I have 2 Cat2924's tied together with 2 1000SX GBICs. I have a green light on both ends. When I first setup the switches I thought everything was OK. HPOpenview detected the far end switch but soon after installation it lost connectivity and was going up and down but more down than up. A client...

I am using CW2K and It works great while it is working at all. About every two weeks I have to reinitdb the database. I installed fresh ont a twin p3 700, NT 4.0 srv, SP5. Resource ver. 2.2 and campus ver. 2.4 Every time it fails the ani.log reads something about: Out of Java memory Then...

There seems to be very little data on NIC's that are compatible with GBIC's. We are pretty sure we want to use the G5484sx for multimode fiber. I found the intel pro/1000 XF but I dont know how propritary the cisco gbics are. What is every one else using? Are the Cisco Gbics propritary at all...

How about 1 IP ACL and 1 IPX ACL?

Can you apply a standard IP and an Extended IP ACL to the same interface (same direction)? If so does the Standard list get processed first? I am pretty sure you can't apply 2 extended ACLs to the same interface/direction so I don't see how you could apply a STD and Extended IP ACL to the same...

No joy! Darn. It will show SN for cards as "0" I don't think there is a MIB for the SN on these modules. But i'll survive. However, what a sweet program!!! I love it. I can't believe all the stuff it can do. I use HPOpen View for most stuff but it is slow. This Solar winds stuff is...

There is no "Sh Module" on Cat 2900. But it would be nice. I also tries "sh me da money" but that didn't work either. I see no module or money.

I am familiar with that one. And it does show MBD a system serial numbers. But not the serial numbers off the modules. I am starting to think that it can't be done. Which is going to be a pain for my invintory project. Oh well such is life.

Dose anyone know how to get the serial number off a module with out taking the module out? I can only get the System serial number. TIA :) ;(

Getting the motherboard and system serial numbers are great but how do you get the serial number off of a module? Short of taking out the module of course. Can't seem to find anything that will tell me. Modules like x2922 x2931 and so on. Any one.

Umm...OK. The network in question, mine, is extreemly flat. The New vlan will not have any redundant links in it, so I don't think cst vs. pvst would be an issue. "Right?" Also, I dont' have any really cool switches, all trunks WILL be between 2900's. I don't know if that makes a...

Thanks!! Lucky for me the VLANs don't need to talk to each other. But I will need to pass that traffic over to a different network. I guess I will need a router there. I know that there is some latency when you add a VLAN to a switch. Is there any CPU crunch time when you add a VTP domain...

Yeah MAN!! I use it for all my core switches. The process is exactally the same. Just make sure you use the correct SNMP RO. The only down side that I ran into is that the config maker only polls active ports so if you add a device to a previously inactive port, you'll have to recreate the...

Hey Helper Types! I just took over this network that consists of nothing but 2924 and 2912's. I need to implement a VLAN to secure some traffic going to specific devices. So sure, "just VLAN it!" the boss says. I have documents that say trunk this and port that but you know how it...