Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. BMB1475

    Remote Announcement Recording Via Vector

    Hello to all, has anyone ever designed a vector in the ACM that could be used to select and record specific announcements remotely rather than utilize the remote-access dial in? I have a significant number of users that are now remote and i would love to provide them with an IPO style call tree...
  2. BMB1475

    SCN using NAT to one site

    Hello all. First I would like to thank you all for jumping in here with you input. I am happy to report that I was able to utilize the WAN port into the old network in order to get the site to site SCN up and working. We ran a direct line into the old network switch into the WAN port and as it...
  3. BMB1475

    SCN using NAT to one site

    That is correct. The old setup was a flat network and the system at both sites A & B were on the same subnet. I think we have found and issue on the physical connectivity on the old network. If I resolve then I think the wan port option should work.
  4. BMB1475

    SCN using NAT to one site

    So, i am currently doing some of this real time,I have tried the WAN port or LAN 2 port option: 1. I set the LAN 2 port to the systems original IP address of 192.168.0.250 2. I set the target IP of the IP Trunk at Site A to the IP of the control unit at Site B of 192.168.0.57 3. I changed an IP...
  5. BMB1475

    SCN using NAT to one site

    Thank you for the reply. I can't remove the point to point at this time as it is still in use for data connectivity for site B to access serves still on the old network at site A. I had my network team even remove the ACL on my new VLAN to test and I still couldn't get SCN up.
  6. BMB1475

    SCN using NAT to one site

    Hello Community, I have a question and please be aware that I haven’t done this in some time so if it’s a dumb question I apologize. I have two IPO IP500V2 systems 7.0.23 on both. They were connected on a single network using a dedicated PTP circuit. Site A has the control unit (192.168.0.250)...
  7. BMB1475

    IPO Embedded Messaging Mailbox Full

    I dont mean to sound like i dont know what I am doing but I dont know this interface as well as when i started the IPOP and I spend alot more time with CM now a days. I can see the LVMAIL files in the Embedded File Manager but what am I looking for..? Brian M Battagliola www.chsli.org
  8. BMB1475

    IPO Embedded Messaging Mailbox Full

    Hello All, I am sure that I havent looked hard enough for the answer to this one but here it is. I have a customer that is on an IPO 500 V2 7.0(23) with the 2 port Embedded Messaging. Small office only two mailboxes assigned. One is a person the other is the main hunt groups mailbox. in the...
  9. BMB1475

    Avaya CM 5.2.1 Random Digital Port Issues

    I have TN2224CP boards and all are HW10 and FW015, I installed the system back in July... Brian M Battagliola www.chsli.org
  10. BMB1475

    Avaya CM 5.2.1 Random Digital Port Issues

    Hello Tek Tips Forum Users, I have an Avaya CM config with S8730's running 5.2.1 service pack 9. I have been experiencing two weird issues with my digital phone ports. First issue is that every now and then I will get a help desk call stating that a phone has a high pitch squeal on it when...
  11. BMB1475

    G250 firmware upgrade...

    yeah, i know all the cli commands and i have even pushed SW image files to the other lsp's on the network, upon further reveiw and using the tftp method i have come to realize that this just takes alot longer than i had expected and i geuss that is due to the use of the tftp and the connectivity...
  12. BMB1475

    G250 firmware upgrade...

    i have a customer that has four G250 gatesway configured for SLS so there are no S8300 servers local to the gateways... is there a way to untilize another S8300 server on the network somewhere to use its TFTP function so that i can update the firmware of these sites remotely. Brian M...
  13. BMB1475

    CM to IPO Conference Bridge

    Yes Brian M Battagliola www.jumacorp.com
  14. BMB1475

    CM to IPO Conference Bridge

    Hello All, I am having a difficult time getting up an H.323 trunk for the connection between the IPO and the CM... CM is a 5.2.1 and the IPO is 6.0 I have done IP trunks between these two system types before just not on these versions. I seem to have the trunk programmed correctly and just for...
  15. BMB1475

    Tentant Groups and MOH

    I built it in a test environment and it followed the tenant number of the station. thanks for the replies..... Brian M Battagliola www.jumacorp.com
  16. BMB1475

    Tentant Groups and MOH

    I am only in the implementation stage and I assumed that it would be the users tenant assignment but I just figured I would ask to see if I got a different answer from the forum. Brian M Battagliola www.jumacorp.com
  17. BMB1475

    Tentant Groups and MOH

    I have a MOH question regarding tenant groups. If I have two separate MOH sources setup for tenants 1 and 2 and I have a user in tenant group 1 that dials a TAC for a trunk group in tenant group 2, when the call placed out on the trunk group in tenant group 2 in placed on hold by the user in...
  18. BMB1475

    911 Question

    Well thanks for the helping idea, however that’s not what I was going for. I think managed to work it out and it seems fairly simple but its a two step process. First: in the Avaya PBX I set the IP Network Mapping Emergency Location Extension to an extension not assigned in the system in the IP...
  19. BMB1475

    911 Question

    Hello all, I have a question on whether or not anyone thinks that this is possible. I have a customer’s system (CM 5.2 on S8500) that is in two buildings on the same block, building one is the main system location and building two is using IP sets on a POE switch with no LSP or gateway, have...
  20. BMB1475

    IPO R6 Embedded Messaging

    I know very little about the Embedded Messaging and need help on whether or not this can be done as I am having trouble implementing it. the sale person sold it to the customer like this and I am trying to make it work. they want calls during the day to come into the main hunt group and after 6...

Part and Inventory Search

Back
Top