Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Power Inline auto|static max 7000 is set after reload
Here is: Cisco Internetwork Operating System Software IOS (tm) s72033_rp Software (s72033_rp-PK9SV-M), Version 12.2(17d)SXB6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2004 by cisco Systems, Inc. Compiled Fri 17-Dec-04 05:01 by hqluong Image... -
Power Inline auto|static max 7000 is set after reload
I don't think is a power issue, maybe is an issue with this IOS for the IEEE class 3 device (15.4 Watts), I have 2 WS-CAC-3000W PS in combined mode, total power is 3780.00, used power 2257.92 approx, available power 1522.08, BUT, to check if you are correct I have turned off 4 modules, and... -
Power Inline auto|static max 7000 is set after reload
Hi, "power inline" is not available in my switch... Angel -
Power Inline auto|static max 7000 is set after reload
Because in the show runnning-config it is showing interface FastEthernet9/1 (Example interface) no ip address switchport switchport trunk encapsulation dot1q switchport mode trunk power inline auto max 7000 end but startup-config shows: interface FastEthernet9/1 (Example interface) no... -
Power Inline auto|static max 7000 is set after reload
Yes, I have issue Write mem and Copy running-config startup-config. Worst, if I run show startup-config, it shows me the interfaces are configured as I saved (what I want it to), but always starts applying the power inline auto|static max 7000. -
Power Inline auto|static max 7000 is set after reload
I have a Cisco WS-C6509 with two Sup720, 3 PoE Cards WS-F6K-FE48-AF... IOS Version 12.2(17d)SXB6 I changes the interfaces to use power inline auto (for avaya VoIP Phones), or power inline auto max 15400, or power inline static max 15400, or whatever I set to it, and it works fines, but just...
