Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Synonix

    dynamic ip / SDM question

    what command can you use to find out your dynamically assigned IP address from your ISP on a router? also I'm trying to learn the SDM for the router for some cert questions that might show up and I'm having some problems... i cant go into the other options tab, as in when i click on it it just...
  2. Synonix

    LAB 2950-24 SSH issue!!

    i got SSH to work on the switch with what seems to be the newest IOS version for the 2950-24 but now im having another problem: i got everything ready for SSH to work including domain names and enabling it through VTY. I add a username and password through the console and try to log on via SSH...
  3. Synonix

    LAB 2950-24 SSH issue!!

    ok guys i got a 2950 24 port switch and im trying to configure it with SSH. i just formatted the flash and loaded up an IOS i thought would support ssh but it seems the SI for this IOS version dosent support SSH and the EI does. now is SI and EI 2 different IOS OS's or does it just matter what...
  4. Synonix

    Weird ping issue.

    Added the command. Didn't help. I think I'm going to flash the lab and start fresh. i got my ICND coming up on June 11th so i gotta just reinforce what i know and stop worrying about some BS like this. Its gotta be something with the computer it makes no sense that everything but the pc can...
  5. Synonix

    Weird ping issue.

    There isnt a pc2 yet because i dont have another ethernet port to use. all switches and routers can communicate on every port. The only thing that dosent is PC1 to router1's serial IP and obviously anything beyond it. Note that it does ping to the router1's ethernet interface. Heres requested...
  6. Synonix

    Weird ping issue.

    Sorry for the late response. Was quite busy :D here you go: Router1: sh int eth0/0 Ethernet0/0 is up, line protocol is up Hardware is AmdP2, address is 0005.32ae.1ec0 (bia 0005.32ae.1ec0) Internet address is 192.168.1.2/24 MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability...
  7. Synonix

    Weird ping issue.

    OK heres the SH run for both switches. R1: Building configuration... Current configuration : 955 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname SynoRouter1 ! enable secret 5 $1$uSUx$N4b7Hhjv3bXQLfB1l39Qw. ! ip...
  8. Synonix

    Weird ping issue.

    thnx vic will try when i get home.
  9. Synonix

    Weird ping issue.

    thats fine n all with the 3rd router but i should still be able to ping the outside IP of the router on that network from my computer. There is no frame relay involved in that request. its been done before with this setup and now i cant. as far as i can recall i changed nothing except when...
  10. Synonix

    Weird ping issue.

    i apologise, your right burt. there is no FRS in the middle. PC1-->Switch1-->Router1-- B2B Frame Relay over Serial --Router2<--Switch2 i MIGHT have switched around the DCE DTE cables back when i was rearranging the lab on a rack. and if i flip flopped the connection and the clock is on the...
  11. Synonix

    Weird ping issue.

    your topology is correct. Im at work right now so ill add the pvc when i get home. Why should the switch be doing the clocking instead of the router?
  12. Synonix

    Weird ping issue.

    im going to try to explain this without doing a ton of Sh runs. I got a lab im working on right now which has 2 routers and 2 switches. Routers are running back to back frame-relay. Literally everything communicates with everything else. I can ping from the switch on one one end of the network...
  13. Synonix

    SSH problem

    Starred burt :D i know how much you like them from lurking other threads. only thing was you DO need a default gateway for tftpdnld but i just put it as the TFTP server IP and it worked fine. just cant leave it blank... weird. i know nothing about xmodem at the moment so ill have to do some...
  14. Synonix

    SSH problem

    thnx vic. Yeah burt i saw that while snooping around the cisco site but you need more authentication than i have to actually use it. funny how one of my routers did have enough space and the other one didnt... and me assuming they were both the same because my lab came from the same place...
  15. Synonix

    SSH problem

    Hey guys just want to ask one more question. Is there a program or some sort of database that will tell you what IOS versons do and don't work with specific routers and switches? i mean my 2610 router has ios ver. 12.1 and i was wondering if i can go to 12.2 or higher. it only has 36k memory and...
  16. Synonix

    SSH problem

    Thnx burt and vic. Looks like im screwed with these switches and SSH no biggie i guess. Woulda been nice to packet sniff and not see clear text tho :( back to telnet.
  17. Synonix

    SSH problem

    Hey guys, So im taking this class online and they were doing a brief overview on how to setup SSH on a switch. They were using the crypto command after establishing an ip and domain name for the switch. I had no problem getting an ip and domain name but i couldnt get crypto to work and when...
  18. Synonix

    Labs for my lab?

    thnx burts. BTW whats the reasoning behind the smaller non-rackable routers? are they supposed to capture the home audience or just a small business?
  19. Synonix

    Labs for my lab?

    Hey guys i just got the last few pieces of my lab in the mail a few days ago and i was wondering if anyone knows where i can download or buy any labs ( as in questions or steps ) for it. Oh and lastly, i was told that i should also invest in a router that has a GUI as part of the lab as well...
  20. Synonix

    ICND vs CCNA .. btw HI!

    I got all I need for now from this thread and then some... like a lot of some haha, I'm done posting until I get all my equipment, thanks :D

Part and Inventory Search

Back
Top