Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: jonta
  • Order by date
  1. jonta

    dial up access to ipo

    trying to dial into ipo have password and user name what is procedure as i have only worked onsite with ipo many thanks
  2. jonta

    problems using ip phone 5610 on ipo403

    dt handsets do work on version 3.0 (40) i can see problem must be incompatable handsets 46xx instead of 56xx thank for your help
  3. jonta

    problems using ip phone 5610 on ipo403

    hi having problems starting up 5610 ip phone on ipo 403 that is running version 3.0 (40) and dt handsets i have a vcm5 fitted and have the ipsets firmware in the manager folder on the manager pc that is running the tftp log when i connect the ip handset it runs through setup i enter the address...
  4. jonta

    406v2 and DTE...

    have you tried a different terminal emulation program tera term or some other vt 100 emulation try a search on google good luck
  5. jonta

    ipo 403 booting problems the saga continues

    ip403 not booting saga thanks for all input escorthosis pointed me in right area fault was a faulty dual modem card once removed system booted okay and is now working thanks again jonta
  6. jonta

    ipo 403 booting problems the saga continues

    thanks for all input we are getting closer to the end please see attached screen dumps of dte output (hyperterminal) and tftp output i deleted the config and firmware i set up a boot p and as you will see from screen dump the 403.bin file has been sent to the unit however the unit is in a...
  7. jonta

    avaya ipo 403 not booting part3

    thanks for all tips so far none have worked but pretty sure im closer to a solution bootp entry set for mac address and ipaddress 192.168.42.1 manager set to 255.255.255.255 file name set to ip403.bin in manager directory tftp log starts and lists following wed 28/11/2007 13:00:00:Received...
  8. jonta

    ip403 not booting part2

    thanks for tips so far however none have worked i have connected to unit via dte, powered system on and got the following (loader version IP403 Loader 0.81 4MB - 2xLV160 Flash-120ns SDRam-10 CPU revision 0x0502) I then sent the AT, AT-X2, AT-X3 commands and have recieved an erase confirmation...
  9. jonta

    avaya ip office ip403 not booting fully

    i have an avaya 403dt i have cleared the config using dte commands of at-x2, at-x3, also tried to upload operational using the at-x command it failed i think because bin file was in wrong directory system now stuck in permanent boot status light is red dt port leds are yellow and green i cannot...

Part and Inventory Search

Back
Top