Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. billk89

    changing port speeds

    If i change a prot from half duplex to full would this cause the port to drop for a second. Not sure if i can do this during working hrs? Thx Bill
  2. billk89

    Internet with VPN

    Got it Split tunnel was the trick
  3. billk89

    another newbie needs vpn setup help in PDM

    forget the PDM use console http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml copy and past smiple as that Good luck Bill rember as long as you do not write mem, all you have to do is reboot and u will be back to normal
  4. billk89

    Internet with VPN

    Hi I switched to a new pix 515e and had to create new vpn users/groups but now the internet does not work with the VPN. VPN is working fine but know internet, any ideas Thanks Bill
  5. billk89

    add a VPN user

    What are the commands to create a user account to this group as it is right now i have users just putting in the same password to get connected to the VPN vpngroup someoffice address-pool someoffice vpngroup dns-server 19x.x.x.x vpngroup someoffice default-domain somedomain.com vpngroup...
  6. billk89

    ACL help

    I have 2 subnets 10.x and 1.x with a router between them I have a pix on the 1.x network that does the NATing for both the 10 and 1 networks to access the internet. I want 2 computers from the 10.x network to be able to access the 1.x computers but do not want the 1.x computers to access the...
  7. billk89

    fixup protocol

    I have pix version 6.1 on a 515 I have a bunch of the fixup protorocl in the running config Do i still needs thses on version 7.2 Also how can i allow pptp to go out on the pix I have one computer behind this pix that wants to connect to a windows vpn server in the ohter part of the city...
  8. billk89

    515 acl or no nat

    I have a 1.x network and 10. The 10.x is behind a 1600 rotuer and all the rules are open to access the 1.x network, but I cant access it Is there anything missing on the pix side the 1.x network that could be stopping access to the 10.x network here is the pix config PIX Version 6.1(1) nameif...
  9. billk89

    Printing issues

    Yea it got stuck again restared the spooler and then it printted but cut it short again , Somthing on that computer anyway ill keep digging thx for the posts
  10. billk89

    Printing issues

    You could be right the funny thing is though this machien is the fastest one we have with 2 gigs of mem, but its not to say that somthing is eating up the memory, going to have a look Thx bill
  11. billk89

    Printing issues

    I have a new design jet , that works on all my computers expect the one. So I knows it’s something in the os’s side that could be causing issues, hooked it up to usb and still the same , we know its not network issues, also reinstalled the driver still the same. What happens is that it seems to...
  12. billk89

    pix 515

    pix 515 os 6.1 32m ram Can I and should i go to 6.3 Also can i jump right to 6.3 from 6.1 Thanks again Bill
  13. billk89

    ACL question

    router#conf t router(config)#ip access-list extended 100 router(config-ext-nacl)#no 40 router(config-ext-nacl)#40 permit ip host 192.168.10.63 192.168.1.0 0.0.0.255 router(config-ext-nacl)#end router#wr ? Also what is this telling me the no 40 line, then 40 permit ip host 192.168.10.63...
  14. billk89

    ACL question

    Standard IP access list 10 permit 192.168.10.0, wildcard bits 0.0.0.255 permit 192.168.1.0, wildcard bits 0.0.0.255 Extended IP access list 100 permit ip any host 192.168.1.1 (30561 matches) permit ip any host 192.168.1.199 (1 match) permit ip any 192.168.100.0 0.0.0.255...
  15. billk89

    ACL question

    Still didnt work, must be somthing im missing here here is the config , any one see anything i do not have there thanks again Bill version 11.2 no service finger service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname ! enable secret 5 enable...
  16. billk89

    ACL question

    I have a 1600 here are the acl's access-list 10 permit 192.168.10.0 0.0.0.255 access-list 10 permit 192.168.1.0 0.0.0.255 access-list 100 permit ip any host 192.168.1.1 access-list 100 permit ip any host 192.168.1.199 access-list 100 permit ip any 192.168.100.0 0.0.0.255 access-list 100 deny...
  17. billk89

    Credentials asked when publishing an application

    Join the domain frist then install citrix this way you will not get prompted for user info
  18. billk89

    how to get rid of the old exchange server in AD

    Hi , i just migrated my exchang to a new server. now When i go to create a new user account I have the option to attach the mail box to the old server. How to get rid of the old server from showing? Thanks again Bill

Part and Inventory Search

Back
Top