Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. KalboKowboy

    System Capacity

    You can then just delete them out in cmd 10 by "CCC"ing them." What exactly does that mean? Thanks, John
  2. KalboKowboy

    Problemed Extensions

    2000 IPS I haven't had a chance to look at that command yet. My computer support duties have been keeping me busy. Thanks, John
  3. KalboKowboy

    System Capacity

    Sorry, I will avoid calling the NEC techs if I can. They are overpriced and don't always fix the problems. I've fixed problems that the NEC techs didn't. Anyways, You only covered the programming of the phones. And that was kind of vague. But, I definitely understand and have used...
  4. KalboKowboy

    Problemed Extensions

    I have two extensions here with problems. Probably the easier of the two problems is that one phone, the message(voicemail) speed dial button on my DTR-8D phones won't dial extension 8000. The other extension won't go past the "Initialize" message. And I've wired up a phone directly to the...
  5. KalboKowboy

    System Capacity

    Ok, today I finally ordered 2 DLCP cards to replace 2 of the 8LCAA cards. Ok, any advice on the procedures to remove the 8LCAA cards and to install the 2 DLCP cards? I don't know how to remove the old analog extensions and to add the new digital extensions. All my extensions are either 80...
  6. KalboKowboy

    Calls to Intercom

    Woohoo, the 601 works for me. And I needed it today. Thanks guys!
  7. KalboKowboy

    System Capacity

    Hello All, My telephone system vendor tells me that my system cannot take anymore cards like the PN-8DLCP so that I can add more lines. They tell me I need to add another chassis/cabinet in order to add more lines eventhough I have open slots in the chassis. Below is the chassis layout of my...
  8. KalboKowboy

    Can I change a Station No.?

    OzzieGeorge, Thank you so much. That worked beautifully. And Cmd 200 on 80 = 804. What does that tell me? Thanks again, John
  9. KalboKowboy

    Can I change a Station No.?

    Hello All, I am a network admin that gets to handle a NEC 2000IPS phone system at our small company. I want to change an Ordinary Station No. from 1111 to 8007. Station 1111 is at LEN 01040. I don't see a clear cut way to do this. I usually use MATWorX32 and MOC to do what I need to get...

Part and Inventory Search

Back
Top