Search results for query: *

yes I have works on other sets

Trying to transfer in house. When I hit transfer the 2nd time the call wont go through. It only happens on this phone all other phones will transfer calls.

I put in 0 and 00 but this is what I show TYPE RDB CUST 00 ROUT 22 DES TKTP PAG NPID_TBL_NUM 0 NACC PGNR ESN NO ICOG OGT SRCH LIN STEP ACOD 88 TARG 01 02 CLEN 1 OABS TIMR ICF 512 OGF 512 EOD 13952 DSI 34944 NRD 10112 DDL 70 ODT 4096 RGV 640 GRD 896...

I have a Route 22 for overhead paging. I set TARG to 01 and 02 however when i go to ld 16 to put tARG to 00 it wont let me. I have a bunch of phones with TGAR 0 that i need to restrict from Route 22 so they dont overhead page. How can i do this without having to change every phone TGAR to 0?

Here is a phone that will not transfer calls, can someone look and see why I cant do so? I hit transfer i am able to pick up another line and dial, but when I hit transfer again it will not transfer the call. DES ER TN 004 0 13 06 TYPE 2008 CDEN 8D CTYP XDLC CUST 0 FDN TGAR 0 LDN NO NCOS...

I am new to Avaya. (NORTEL dude) I assume I need to put a call park on the sets in the hunt group. I would need an example if possible. Right now if the caller calls the vdn and goes through the vector, the caller presses 1 to go to the correct hunt group. The call then gets answered and when...

I have 2 phones in a hunt group which are reported on CMS. User would like to be able to receive a call, place them on hold and answer another incoming call. I checked the Hunt group for them, I thought it would be taken care of in the Multiple Call handling box. What else can I check...

it stops at the Denial event 1206. Is this a problem with my PBX or with the server trying to dial out?

We put a Vocera telephony server on a lineside T1. Vocera cannot dial out to a local number. I did a Lis Trac for the TAC and I get this: 09:30:38 Calling party trunk-group 71 member 1 cid 0x17ad 09:30:38 Calling Number & Name NO-CPNumber NO-CPName 09:30:38 active trunk-group 71...

I have an ACD built for a room service desk There are 2 phones with the ACD key of 3663. When no one is on the phone, the caller hears the ring before the call is answered. If someone else calls and the previous caller is still being helped by the agent, the caller will hear an announcement...

I have a person who wants to be able to use the bluetooth from the pc via the softphone. When I setup his softphone on his pc, the only option under the Audio Tuning Wizard gave me Simga Tel and no others.

so I can build it on App builder to call transfer to that particular ACD#?

My scenario in a Menu Service that I am trying to achieve is when a caller gets to a message I have set up stating: "Press 1 to continue to hold" Where from the Menu Service in App Builder do I point it to hold until the callee answers? Thanks

Well it looks like we won't be using the Norstar after all... Thanks for you answers fellas!

the one on the right appears to be a different card from the left. it appears the right side is for the stations.

I only have 3 card slots.. 1 and 2 are large and tiny one in slot 3.... Don't tell me I only have capabilities for 4 incoming trunk lines?

I have a CICS with 5 analog pots lines going to lines 1, 2, 3, 4 and 31.. All of them work fine except 31. I moved the jumper to 32 no workie same with 33, 34 I programmed the phone to show an appearance and ring for those lines. I checked the keys and it has line 31, 32, 33 and 34 but no dial...

I CAN get to the Call Pilot my problem is I CANNOT OPEN a MENU SERVICE IT SAYS the system could not open the application from the server. Please check the connection to the server and try again. I can open other Menu Services and Announcement services, just not this particular one that I am...

Let me start over... I cannot open a menu service in the application builder. I get a message saying that it cannot be retriieved from server or something like that.

Yep it is on the client PC