Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
1700 and NetBIOS?
was it the firewall? dont forget on the machine you wan to get the new ip information you neeed to register it by either rebooting or ipconfig /reregisterdns Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
Configuring VWIC2
try this network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
1700 and NetBIOS?
even with windows 2003 you should still use wins..many apps depend on it for that error if its possible restart the brwosing service. set up WINS on a box if its possible and which box is handing out dhcp to your clients? Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
Point to Point configuration between 2620 and 1720 routers
on the remote try and only put ip route 0.0.0.0 0.0.0.0 10.1.1.2 on the main try and only put ip route 0.0.0.0 0.0.0.0 sonic gateway for your dhcp set it up like this ip dhcp pool 1 network 192.168.2.0 255.255.255.0 default-router 192.168.2.1 Mauricio MCP, MCSE, SMS 2.0, DCSE... -
Point to Point configuration between 2620 and 1720 routers
type sh ip int brie and post still need the sho diag Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
Point to Point configuration between 2620 and 1720 routers
depends if your using a seperate csu/dsu device thats in between your router and ISp or is it cleaned from the providor? your using straight point to point T1 right? which one is the dce or dte? or does your router use a WIC ? do the sh diag on the router Mauricio MCP, MCSE, SMS 2.0, DCSE... -
Point to Point configuration between 2620 and 1720 routers
interface Serial0 description remote ip address 192.168.35.78 255.255.255.252 ip route 0.0.0.0 0.0.0.0 192.168.35.77 --------------------------------------------------------- interface Serial0 description main site ip address 192.168.35.77 255.255.255.252 Mauricio MCP, MCSE, SMS 2.0... -
Point to Point configuration between 2620 and 1720 routers
any how sounds like you need something like this on the remote side ip dhcp pool 1 network 192.168.2.0 255.255.255.0 dns-server 192.168.x.x default-router 192.168.2.1 netbios-name-server 192.168.x.x domain-name xxxxxx ! ! ! ! ! interface FastEthernet0 description LAn for users... -
Point to Point configuration between 2620 and 1720 routers
are you using a routing protocol like EIGRP? Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
Putting a new IOS in
or just type "wr" ( without the quotes) Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
dual wan with NAT
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hirp_c/ch20/h_pbrtrk.htm it should do it for you Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
Point to Point configuration between 2620 and 1720 routers
get on your 1720 router go to enable mode and type sho run and post this back also sh diag andpost this as well on your 2620 do a sho run and post this as well Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
1700 and NetBIOS?
ok kewl... do you know what server is serving DNS and or WINS? If you dont we can come up with a stratagy to set this up not a problem at all. you said,, you using active directory? Yes and No(on the NT side) whats the name of the server in active directory and what server is your DNM (domain... -
Combining 2 T1 lines on Cisco 3600 series router Help
Since I only have 2 Serial interfaces, I should multiply by 2 and come out with 3072, rounding down, 3070. sure 3070 looks good Any pitfall I should be aware of? make sure boths side are configured like this How do I test to be sure that I have done it correctly? press ctrl z (takes you back... -
Connecting a Home LAN to a cable Modem
you say my cisco lan...you have a router for this or are you using a cisco switch with ip routing enabled? what model and IOS do you have? Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
1700 and NetBIOS?
you using active directory? is this a new setup? when your on this server rec-server..can you ping yourself? is DHCP being handed out by your servers? if so whats it called or is DHCP being handed out by routers? Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
1700 and NetBIOS?
sure Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
Echo's with VOIP. Please Help!!!!
is this voice set up using call manager? ping across your lines and paste the info here ...i need to see your reply times Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
Putting a new IOS in
on the router type sh flash and post it to the forum Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written -
1700 and NetBIOS?
on your server do a ipconfig /all and post Mauricio MCP, MCSE, SMS 2.0, DCSE, CCNA, CCNP, CCIE Written
