Search results for query: *

I need to create a tandem operation. What I am trying to achieve is having calls that come in on a pri line automaticly grab a trunk from a regular co line. and if a call comes in on a regular co line routes the call to the T1\E1 Can this be done. I can not find any examples of tandem...

Currently I have Dcs working between two Definity's both are R9.5 exension dialing is working between the two. i would like to set up a central attendant, will the BLF field work at principal attendant? Also on switch 2 how do I point to the attendent on switch one. DCS trunk group is set to...

I when I checked the error log this morning I had tone clock error I am using a 2182 tone clock, I do not have a external clock reference, incoming lines are pots. the TDM- Clock error is 1281 which has to do with time slips Here is the ds1 config on Switch1 Location: 01A15...

I did create a crossover arrangement as you recommended. the errors that I am now getting are sync 1793 and UDS1-BD 3109 and 3073 Do I need to have the sync configured? I do have it configured on both systems. Also it it possiable to do this without the ICSU's

I have two definity's both are r9.5 Each has a tn464f and a ICSU attached. The problem seems to be the signaling group. I have followed the examples in the d81 network conectivity manual but the D channel does not seem to want to come up. Am I missing something?

I would like to know the best way to setup night service. I have purchased a BOGEN NR100 which will produce a ring tone over our paging system. What we would like is when in night mode or using DID number, will ring all over the plant. We would like a to be able to go to any station dial...