Search results for query: *

Thanks for your answer: My ESN: REQ prt CUST 0 FEAT esn MXLC 255 MXSD 255 MXIX 255 MXDM 255 MXRL 255 MXFC 255 MXFS 255 MXSC 255 NCDP 3 AC1 0 AC2 72 DLTN YES ERWT YES ERDT 6 TODS 0 00 00 23 59 RTCL DIS NCOS 0 - 0 NCOS 1 - 0 NCOS 2 - 0 NCOS 3 - 0 NCOS 4 - 0 NCOS 5 - 0 NCOS 6 - 0 NCOS 7 -...

Trunks have NCOS 0 (just for internal calls) but CLS UNR: Asterisk-11c Interconection trunk: DES FREEPBX TN 002 01 TYPE DID CUST 0 TRK DTI2 SICA 2 PDCA 1 PCML A NCOS 0 RTMB 1 1 NITE AST NO IAPG 0 CLS UNR MFC CNA WTA LPR APN THFD BARD P10 MFLI 0 MFPD NO TKID DTCR NO DATE 7 FEB 2025...

Thanks Firebird Scrambler, for your answer, but routes don't have TARG, TARG is blank

Hi, I've got a Meridian 11c rls 25.40B, the 11c is interconnected with an asterisk PBX via E1 card R2MFC signaling, I can call extensions from 11c to asterisk and viceversa, the 11c has E1 card for external calls (outbound and calls to PSTN), I'm trying to configure the 11c for permiting the...

Hi, I've got a button for adding fields (select option value and Input) to a html-JavaScript table, When I select an element from the select option value (idmedico) I use onchange option in the select for going to a JavaScript function for fetching the name for the idmedico and then populate...

HI, I tried >ld 96 .enl dch 5 DCH1019 5 0058F6AC 00000003

Hi, for testing I created one channel on PRI card and make a loop in BNC (PRI cable) but It appears as MBSY: >ld 60 .stat 5 PRI2 LOOP 5 - ENBL REF CLK: DSBL SERVICE RESTORE: YES ALARM STATUS: ACCEPTABLE CH 01 - MBSY TIE VOD * CH 02 - UNEQ CH 03 - UNEQ CH 04...

Hi, I've got a Meridian 11c rls 25.30, I want to interconnect the 11c with an asterisk using a NTAK79BA PRI card (in 11c) and A108 Sangoma card (in Issabel Asterisk), please Could somebody help me with 11c parameters: ld 17 - D channel, ld 16 Rout, ld 15 NET, ld 14 TIE port, ld 73. And If...

Thanks for your answer, I did the following and It works: $query = "SELECT * FROM tbl_order_id,customers WHERE "; $query .= 'tbl_order_id.customer_id=customers.customer_id AND '; if($_POST["is_date_search"] == "yes") { if($_POST["customer_name"] != "") { $query .= '...

Hi, I've got two mysql tables "tbl_order_id" and "customers", the mysql tables have in common the field "customer_id", I want to join tables using customer_id for showing customer_name field in datatable (customer_name is in table customers) This is my tbl_order_id table: This is my...

Hi, I've got a customer with a CS1000 rls 6 co-resident (CPPM), They have two DTI2Mb cards (E1), They have Ip telephones 1140e,2004 etc.(unistim), digital and analog traditional phones. But I've got the following problem: When The E1's card present errors (For failure in the carrier) the Ip...

Hi, I have to change TTY port to BITL:7 and PARY:EVEN, because TTY 6 is configured as ACD for sending ACD data to capture it in Visual Basic 2010, If I use 9600,N,8,1 in TTY the ACD data arrive corrupted to visual basic (If I use procomm to capture data, the data arrive ok, but in Hyperterminal...

Thanks bignose21, I disabled and tried to change serial port on MGC but I didn't work, it skips BITL and PARY parameters, I worked deleting and creating again TTY.

The serial port (COM)I want to change Parity (PARY) to:EVEN and data bit lenght (BITL) to: 7 is in MGC 0 0 this are the parameters that has: ADAN TTY 6 CTYP MGC IPMG 0 0 DNUM 6 PORT 1 DES callcenter BPS 9600 BITL 8 STOP 1 PARY NONE FLOW NO USER ACD CUST...

Thanks bignose21, let check the manual, My server is a CPPM card

Hi, I've got a CS1000 rls 6 co-resident I want to change a TTY (ADAN) Parity and data bit lenght, but manual says (LD 17): Note: This prompt is blocked for co-resident Call Server applications (Call Server and Signaling Server applications co-located on a CP PM server). Serial port configuration...

I tried Phone File Server Type: "Manager" and "Memory Card" but DS30 keeps the led in fixed red.

Now because I erase the DS30 using "AT-X" command, I'm trying to upload the BIN file to the DS30 module, for doing that I set up the Ip Office Manager (version 10.1(67)) for TFTP transfer bin file to DS30 module, The TFTP Log shows the DS30 bin file request, the following image shows TFTP log...

Thanks, So as I entered the "AT-X" command, now the DS30 is blank (red led indicates waiting for firmware), then I put DS30 in another Ip Office port and the DS30 firmware will download automatically from the main module of the Ip Office (It doesn't require that the Ip office manager software...

I entered the "AT-X" command, the DS30 led now is red fixed and the module send the message: TFTP Poll Sent TFTP Poll Sent the DS30 the binary file will be downloaded it from IP Office or from IP Office Manager? because the DS30 sends message "TFTP Poll Sent", I remember that I erased a IP...