Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
PIX 506E - Allow external access to internal server
I have an internal security camera server that I need to access from outside the network. The specific port the camera software uses is 32001 and the server has been assigned a static address of: 192.168.1.100 I have tried several things, but cannot seem to get it to work. I cannot get it work...- chamig
- Thread
- Replies: 4
- Forum: Security, hacker detection & forensics
-
Router Config Help - No Internet Access
Thanks Chris, I noticed that shortly after posting the message. Everything seems to be working great now. I am working on setting up VLANs and DHCP on the switch...and then on to the PIX... I'll try not to ask for too much help! Gotta love Cisco! Thanks again. -
Router Config Help - No Internet Access
Ok, here's an update. I configured NAT and can access the internet through the router with a static ip adress of 172.20.145.2 - 172.20.145.6..any ip address above .6 cannot access the internet. Works the same using a crossover cable and a straight cable from PC to router. I set up NAT to... -
Router Config Help - No Internet Access
WOW...that's Networking 101, huh? Thanks for the response! -
Router Config Help - No Internet Access
I am new to Cisco and configuring a new router at a new location. Below is a copy of my configuration. We have a T1 line and an Adtran. I have the router connected to the Adtran with a crossover cable through the FastEthernet 0/0 port. I have a computer connected to the router via a crossover...
