Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tookawhile

    Reverse DNS records missing

    Not sure if this has something to do with the issue, I have host names in the forward lookups which have upper case characters, for example, J-DOE.mycompany.com, and on the face of it, it looks as though it is all of these that are not getting the reverse entries created.
  2. tookawhile

    Reverse DNS records missing

    Anybody? Is this normal?
  3. tookawhile

    Reverse DNS records missing

    I have one Forward Look Up zone an a Reverse Lookup Zone, some of the entries are not being replicated to the Reverse Look Up Zone, even if I re-apply the "Update associated pointer record". I've only just noticed this today, but I now for fact that it looked Okay a month or 2 ago. Is the only...
  4. tookawhile

    Outlook 2007 send/receive dialogue does not close

    Nope, didn't make any difference - it is really odd, but I state again, email is working fine, it's set to check every 5 mins, so even though the Send/receive dialogue is stuck email still comes and goes very 5 mins, just as you'd expect. I've run the Office Diagnostics and every checks out as...
  5. tookawhile

    Outlook 2007 send/receive dialogue does not close

    I'll give it a try, the OAB has around 40 entries
  6. tookawhile

    Outlook 2007 send/receive dialogue does not close

    Outlook2007 on Vista 64-bit When sending/receiving, the Outlook icon in the lower right corner has a timer icon displayed, the Send/receive dialogue box appears (set to detail view), it gets to 97% and just stays like that, email is sent instantly as I can see it in OWA. It say it is trying to...
  7. tookawhile

    JMicron or Intel SATA with Gigabyte GA-P35C-DS3R

    I have a Gigabyte GA-P35C-DS3R m/b which has 2 SATA controllers, the JMicron and the Intel ICH9R. I currently have my O/S/Programs on the JMicron on single SATA drive - no RAID All my data is on the Intel Matrix ICH9R using 2 x 250GB SATA drives in a RAID1 configuration. I decided to hang...
  8. tookawhile

    Cannot load Intel ICH9 32-bit drivers using "F6" install

    I should add that Tyan have sent be a beta BIOS update for the m/b, I will also see if that works,out of curiosity.
  9. tookawhile

    Cannot load Intel ICH9 32-bit drivers using "F6" install

    Well, got another external USB floppy drive (Sony this time, the other one is a NEC)and everything works just as one would expect. I'm still going to use nlite as it is a handy looking tool to have.
  10. tookawhile

    Cannot load Intel ICH9 32-bit drivers using "F6" install

    Well I've found one thing, the USB floppy drive is not on the MS supported devices, but I have to wait to get another USB floppy drive, in the mean time I'll try the nliteOS out, I'll keep you posted and thanks for all the great advice :-)
  11. tookawhile

    Cannot load Intel ICH9 32-bit drivers using "F6" install

    I should have said I had already tried setting the BIOS to the following: set SATA AHCI Enable tp Enable SET SATA AHCI Legacy to Disabled But when I tried the above it BSOD shortly after compeleting step5. I have repeated this process many times, same result. The floppy driver seems to work...
  12. tookawhile

    Cannot load Intel ICH9 32-bit drivers using "F6" install

    A few things to try. I used the 32-bit Floppy Configuration Utility for Intel® Matrix Storage Manager to create the driver floppy, I also used the Tyan supplied one as well. It is odd, as the floppy driver (it is an external USB one) obviously works with it as it loads the driver in, I see...
  13. tookawhile

    Cannot load Intel ICH9 32-bit drivers using "F6" install

    Here is what I tried. I have a server which uses a Tyan Toledo i3210W (S5211) Intel® 3210 Chipset mainboard. It is running XP 64-bit (clean install) using the onboard Intel ICHR9 SATA RAID, 2 x SATA RAID1 disk in RAID1. – all works perfectly. Due to BackExec10.1d not working with XP 64-bit...
  14. tookawhile

    VPN not working using Windows Server 2003

    Now solved. I had configured the port forward and sent PPTP to the required server, and, not being familiar with this router/firewall, I assumed that was that. But once the NAT has been addressed, the firewall rules need to be applied i.e. create a new rule and bind it to the correct IP.
  15. tookawhile

    VPN not working using Windows Server 2003

    SOHO with only the occasional VPN use, so we use the built-in service supplied with Server 2003, using a separate NIC for VPN, using PPTP. Our VPN worked fine until recently, our firewall/router failed and since then I cannot VPN in. The firewall router had to be replaced. We have an external...
  16. tookawhile

    VPN not working using Windows Server 2003

    Apologies - ignore this post, I shall re-post in the correct forum.
  17. tookawhile

    VPN not working using Windows Server 2003

    SOHO with only the occasional VPN use, so we use the built-in service supplied with Server 2003, using a separate NIC for VPN, using PPTP. Our VPN worked fine until recently, our firewall/router failed and since then I cannot VPN in. The firewall router had to be replaced. We have an external...
  18. tookawhile

    VMs and DHCP

    We have a very simple setup at the moment, just one domain, mycompany.com (I believe it should have been named local.company.com - can I this be easily rectified?)and all works fine. My problems is this, we have a bunch of test PC's which are not allowed on the domain (in case our software goes...
  19. tookawhile

    Best way of adding a sub domain

    I have further information now and more questions! To complicate matters further, we have around 30 build/test/processing farm PCs, which we are trying to implement using VM technology, unfortunately this is causing DHCP issues. Each time ATF launches a virtual machine instance to execute a...
  20. tookawhile

    Very simple SMTP email solution

    We out source our email, and we are in the process of changing provider, but have hit upon the following snag. We use BackExec and this has the ability to email job reports and the such like, this works fine with our current provider. The BackExec email client has no provision (that I'm aware...

Part and Inventory Search

Back
Top