Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Problems connecting 2500 to 4000 for CCNA labs
Thanks for the link. I haven't read it completley yet however I"m sure I'll get to the bottom of this problem. I just want to connect two routers to do some CCNA labs. It doesn't seem fair that I get problem after problem after problem... -
Problems connecting 2500 to 4000 for CCNA labs
Andy, the cable is brand new. This is the scenario for the last day or so: The line protocol goes up briefly and then shuts down (permantley). DCE is labelled on the DB60 end of the cable and will only fit into the 2500 (it will only accept a 60pin male connection). The other end other the cable... -
Problems connecting 2500 to 4000 for CCNA labs
Thanks. I tried that at 64000 and 56000 for the 2500 series as the end of the cable is labelled DCE. Do I have to give any other commands besides setting the clock rate with respect to this router? Again, the status is up however the line protocol is down. -
Problems connecting 2500 to 4000 for CCNA labs
Greetings! Yet, another Cisco problem however I'm sure most of you are more advanced then me.. I have a 2500 and 4000 series routers that I'm trying to directly connect. The cable between them is a db60 male (2500) to a db50 male (4000) and plug directly into the serial ports provided by...
