I have 50 l2l tunnels terminating to my ASA. I then allow internet access through the inside interface to my microsoft firewall.
What i would like to do is allow the tunnel traffic to come in on the outside interface like it does now and then allow it to access the internet via the outside...
not sure this is possible with my current router.
f0/0 is connected to DSL modem ipsec vpn back to HQ
f0/1 is connected to store switch. Subnet 192.168.73.0 Subnet 192.168.31.0
what i need to do is nat 192.168.73.11 to 192.168.31.11 is this possible with the current config or do i need...
Does anyone have esxi running with vmotion and DRS enabled. I am told that this is not supported. I thought you could just by add on licenses for these functons. The DELL VMware rep told me i must upgrade to esx enterprise to have this function. I already have VC server.
Thanks
Nick
I have a router with two internet connections. One is DSL one is a ceullar hwic. I have them setup with a flouting static route, make the dsl the primary connection. The vpn establishes fine via the dsl, i then pull the plug on the dsl connection and the Hwic fires up. The problem is the tunnel...
We run a dc at our remote sites that also have a pervasive DB on them. i need to allow a normail user to login locally, restart services, but have now access to active directory. Can anyone give me a recommed setup. Bultin administrat group rights would be great, by i don't want them to have...
I have a bunch of users i would like to disable OWA and Active Sync for. is there a power shell command to do this rather than using the GUI and going into properties on each account?
Thanks
I currently have a 50 site l2l ipsec vpn terminating at a cisco asa at HQ. The remote sites have a 2800 cisco with either DSL for Cable internet service. I have since purchased a spring cellular HWIC for backup and am trying to integrate it. If the dsl goes down i would like the hwic to dial and...
Yesterday we had an internal DNS issue and i believe it broke my RA vpn session that use Active directory for AAA authentication.
Is there command to clear the name and arp cache's on the ASA like the windows ipconfig/flushdns. I believe this is the problem, but cannot reset the device as...
I am currently runnning exchange 2000 with active directory in 2000 native mode with about half 2000 dc's and half 2003 dc's.
Do i need to upgrade my 2000 dc's to 2003 before installing exchane 2007. All dc's in the site where exchange will be installed are 2003. I have read conflicting notes...
I have two application that need to watch traffic comming off of our POS server using a mirror port of the server port. My Dlink switch only allows you to select one destination port as the mirror port. Being that i need two ports, i then have a 10/100 hub plugged into this mirror port to fead...
I currenlty have a 55 site l2l vpn terminating at my asa 5510. All remoted sides are ciso 2801's with a static ip. Can i now added a new site with a dynamic ip rather than static? Or do they all have to be reconfigured as dynamic.
Thanks
Nick
I currently have a cluster of 4 hp dl380 g5's with intel xeon processors. I was looking at ordering a new Dell with 4 Opteron Quad processors. I know i cannot vmotion between these hosts. But is there any issue with shuting the vm down on the intel server. Migrating it to the amd and booting it...
I have code to restart a windows service on a domain controller remotely. The server is running windows 2003 RC2 sp2. It works fine as admininistrator, but doesn't work as a regular user. I have gave the user permissions to the service in questiono via domain controller security policy, but when...
I have code to restart a windows service on a domain controller remotely. The server is running windows 2003 RC2 sp2. It works fine as admininistrator, but doesn't work as a regular user. I have gave the user permissions to the service in questiono via domain controller security policy, but when...
We currently use outlook 2003 in pop3 mode for our retail stores. Each department has a folder and a rule associated with it. The problem is the stores delete the folders or accidentally drag the folders around and it breaks the rules and the organization. Is there any way to lock the folders so...
I need to open a port range on my isa 2000 server tcp port 19000-19999. has anyone come across a script to create protocol defintions. I don't really want to add 999 protocol definitions by hand since you can't open a range with 2000.
Thanks
I am looking for a whole disk encryption package to protect about 10 laptops. Something easy for end users and some kind of admin tool. Any recommendations would be great
Thanks
I have an application that runs on a domain controller that requires admin rights locally for a user to run it. We have the user added to the built in administrators group on the domain, but they then have access to our AD console. How can i remove this right so they cannot open active directory...
one of my information stores has grown about 100GB in the past two days. I cannot find what is causing it. Nothing out of the ordinary in the message tracking logs. Stopped the blackberry services and it still continues. Not sure what else to do. It is only happening on 1 of the 2 info stores i...
I currently have a 2000 domain, i run the forestprep and domain prep of the 2003 media to update my schema to support 2003. I have a few 2003 sp1 domain controllers and don't have a problem. when i try to added a 2003 sp2 domain controller, dcpromo runs completely without errors. but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.