Search results for query: *

I have 2 extensions that, when called, I get forwarded to my own VM rather than their VM if they do not pickup. I see this came up before in thread940-1698820, but there was no resolution. Both extensions have been recently edited with the Web Admin Tool. Thanks John

I appreciate that this is a Cisco Forum but we are looking at a LAN refresh and are looking at options. I have only worked with Cisco but we have an Enterasys Wireless system and their full set of management tools and I see a lot of good things with that company. We are also looking at...

Sorry, this is a long one. We have a flat layer 2 network with a single 6509 at the core. It's a collasped core so we are doing our routing on the same 6509. We have been running this way for 8 years now but have gotten a bit VLAN happy. We are a school and and it has become convienent to...

Our NAC works of the MAC-AUTH-BYPASS feature. I am trying to get this to work on our 2950s. Accourding to CISCO the feature was added to 12.1.5EA. I am running 12.1.22EA but do not see the functionality when I go to the port and do a dot1x ? Am I missing a global command or something? I...

Hi: I am trying to make hunting work on a phone. I have an executive that wants her phone to roll over to her secretary if she does not answer it or is on a call. I have this working by configuring FDN to go to the secretary. However, if the secretary does not answer it never goes to VM. If...

I would like to change what extension someone sees when I call them internally. I have been able to do this for external calls via CLID but when I call an internal user they still see my actual extension. How can I mask or change what people see when I call them? Thanks

Hi: I asked this question the other day but nobody responded so I am putting it to the group again but more to the point. Is there a way I can make changes in CND and push them to our Opt81? For example, our display names are not in a standard format. Some are all caps and some are proper...

We have upgraded from OTM to 3.2 and I have a few questions. Hope someone can help. 1. Is there any way use TM to batch update the switch? For example I can pull all of the data from the switch into TM and see the CPND date under Telephones in the website. I can then sync CPND with CND to...

Is there a way I can have to 2950s stop reporting on interfaces going up and down in syslog level 3? I am setting up syslog on my switches. I have the level set to error or level 3. In my log I get a lot of static with interfaces just going up and down. There are only a few interfaces that I...

Hi: My question: Is there a way to speed up BGP failover? Currently I find it takes about 2.5 min for the failover to kick in after I take down my interface to my primary. Is that just normal or can it be improved? I am advertising the primary network on the secondary edge router and I have...

I have a Sup2 with a dead onboard battery. If I have an extended outage the switch will not boot until I reset the confreg. However the battery is soldered to the board. Has anyone succussfully replace the onboard battery on a Sup2? It is more like the battery is tack welded to a metal...

Hello: I inherited a network that had PVST enabled. At one time they were thinking about a dual core network with multiple fiber links to each closet. I am guessing that they wanted to load balance to the separate cores. That model has been abandoned due to cost and also we are just not a...

I have implimented Solar Winds NPM. It is telling me that most of my cisco 2950s are experiencing high memory utilization. I am trying to determine if this is normal or if I have a problem. I seem to remember that Cisco does not report memory utilization accurately. My CPU on these switches...

Hi: I have two switches running CatOS and I want to get rid of some of the set commands. I remember using the unset command at a former shop in CATos. However I see no way to negate set commands on this switch. I cannot use unset nor can I use no. Any ideas?

I have a dual homed internet connection with Level3 and ATT. I have the ATT side prepended to make it less desirable and thus my secondary. When I go out to the looking glass sites I expect to see both my internet connections as options on the ATT path showing my AS number twice. However I do...

I have been studying my internet traffic via NetFlow. I ahve a 30 Mbs connection. At times we experience issues with slowness and short dropps. I look at my netflow info and I can see that the connection spikes up to 100 Mbs (it is an ethernet handoff from the ISP) It looks to me that we are...

There was a great command in CAT OS called TOP. If your network seemed sluggish you could use the TOP command to dicsover your TOP talkers. Is there an equilivant in the IOS?

I was sniffing on one of my networks and noticed a lot of traffic that I should not have been seeing. I was just sniffing in promiscuous mode with no port mirroring setup and I could see unicast traffic destined to another server. In a switched environment I do not expect to see that. The...

I have a network (VLAN8) that I want isolated from the rest of the network. I am trying to create an ACL that will block 10.0.0.0/8 from getting to this network. When I setup the ACL it does not work. 1. I define the ACL ip access-list extended Honeywell deny icmp 10.0.0.0 0.255.255.255...

Sorry, this is a long one. I am really stuck on this one. I have a dual homed ISP connection with BGP configured. I have my secondary ISP advertising the IP space proviced by my primary and it is prepended. All looks well when testing. Trace Routes and pinging works perfectly. From a 3rd...