Search results for query: *

I have a xc1255 and when the paper comes out after a copy it is wrinkled. I have tried removing the drum and making a copy without it installed and get the same result. Anything else to try? Thanks

we have a merlin legend phone system (408 board wiith mlx-10p phones ) with inuity audix. Often someone will enter an extension into the AA ( auto attendant ) and it will transfer them to a totally different extension. I have wittness this myself. I checked the configurations of the phones...

just switched over to a t1 line from DSL. intitally DNS request are fast but over a period of time they start to lag. Im querying ATT's DNS. I have a windows 2003 server which i changed the enableednsprobe to 0 and I have a pix 506e. What can be affecting this?

with the static statement?

is there a way to have two groups. One named radius and a group named normal. I only want the radius group to authenticate to the radius server. The normal group will continue to be able to just use a one step authentication.

can a radius server be setup and only be required on one vpn group? any example configs if so?

From reading the document on cisco it appears all I have to do is add these two lines access-list 101 permit ip <my internal ip address of my PIX> 255.255.0.0 <.0 of the starting range of my pool 192.168.123.0 ?? > 255.255.0.0 vpngroup specialusers split-tunnel 101...

Im switching over from a DSL line to a t1 line. Right now the pix handles everything ( vpn, static routing, ip forwarding, etc. ). When I get the 1710 I want it to act just like the dsl modem. Should I ask the t1 provider to setup the cisco 1710 in bridge mode? Anything else I should know?

It appears I will most likely need a router in order to get the t1 into my pix. Which one is the easiest to work with? Thanks

Once I switch over to T1 I will have to change 1. ip address outside 2. static routes After those changes, I should be up and running right?

here is a link to what I see in my error log. what is http daemon error? http://www.silvercas.com/drop/pdmerror.jpg

when I add say static (inside,outside) xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy I want to put a note beside it like * to access web server * is this possible?

i already have an access-group called UPS_Outside in my 506e and it looks like access-group UPS_Outside in interface outside when I try to add access-group Wal_AS2 in interface outside it overwrites the UPS_Outside line, why?

Im trying to sqaure away this line you gave me awhile ago: access-list UPS_Outside permit tcp 216.109.112.24 255.255.255.252 host <my external ip> eq 5080 say I wanted to allow 216.109.112.24,216.109.112.25,216.109.112.26,216.109.112.27 to be able to access my network. Using the following...

how can I limit what ips a VPN group is allowed to connect to?

I setup a vpn user name delivery. if that user types in IE http://testserver the page cannot be displayed. But if the same user types http://192.168.1.201 everything is fine. I configured the vpn user as below. Am I missing something? 192.168.1.2 is our winodws 2003 server which is the DNS...

2.3.4.5 is a public ip 192.168.1.150 behind the pix 506e i want to only allow address that begin with 69.248 and on subnet 255.255.248.0 in Also any security risks below? static (inside,outside) tcp 2.3.4.5 22011 192.168.1.150 22011 netmask 255.255.255.255 0 0 access-list UPS_Outside...

I was thinking about what you said yesterday here is a snipped of our config on the pix 506e. ip address are changed to protect the innocent :) ip address outside 2.3.4.6 255.255.255.224 route outside 0.0.0.0 0.0.0.0 2.3.4.5 1 we own ip address 2.3.4.6-2.3.4.36 . i just noticed that route...

how do i change the following to allow anyone on 72.6.0.0/16 in access-list UPS_Outside permit tcp host 69.248.*.* host 192.168.1.150 eq 22011

I might encounter? I believe for each ip I want to allow thru Ill have to add another access-line for their ip START->>>> access-list UPS_Outside permit tcp host 69.248.xxx.xxx any eq 22011 access-group UPS_Outside in interface outside static (inside,outside) tcp interface 22011...