Search results for query: *

Sorry if this is a duplicate, the forum does not appear to be taking my posts. --I am prepping to start my CCNP tests and have decided to do the ONT first. I have read the cisco press book and have been self testing against the questions. Any suggestions for additional test-prep that will...

I am prepping to start my CCNP tests and have decided to do the ONT first. I have read the cisco press book and have been self testing against the questions. Any suggestions for additional test-prep that will help me out? TIA!!

I am starting to study for CCNP tests and thought the ONT would be the easiest to start with. I have the new cisco press book on this subject. Any other advice or suggestions other than hitting this book hard? TIA!

Would like to tweak a router to get rid of some discards I am seeing, any help appreciated. 7206 -fa0/0 and fa0/1 in a port channel port channel broke into sub interfaces port channel is a trunk each sub interface in a seperate VLAN dot1q encapsulation other end 2900 switch fa0/22 and fa0/21...

My asus/intel based PC has decided to not boot. Odd thing is that after going through bootstrap the screen just goes black and there is a small ASCII smiley face at the bottom of the screen and some dashes at the bottom that stream accross. Sounds like either a virus or hardware but I really...

got hit by a worm doing the following: propogates over port 139. Does a buffer overflow attack on symantec AV. Leaves a file on the root of the C drive called: U.exe. Is only affecting Windows 2000 OS's that are a bit behind in patch levels. Systems I patched just this weekend are...

We have a user AD account which was disabled but has been renabled. At this time we cannot access the email account. I have checked the permissions they look ok. Regardless, tried giving my account full access, did not work. Tried giving that user object full access, also cannot log in...

I keep receiving 565 security access failure errors in my security log on my primary domain controller. The description is "directory service access". The attempted access is by my exchange server. The content of the error with name changes is: Object Open: Object Server: DS Object Type...

Taking CCNA for the first (correction ONLY) time tommorow and am wondering something: I am assuming there will be configuration problems where you have to type syntax. Will short cut commands work or will I get the problem wrong even though its really right? ie.. copy run start sh run conf t...

At my location I have a 4506/4507 pair at the core and 3550 edge switches. I have a client on one particular port which has a static IP. I would like to keep this client from running a network scanner. I cannot control what is installed on the client, it is in my network and has routes to...

My primary domain controller seems to be having trouble controlling dmadmin.exe. As I understand it this program runs when you change partitions. However, nothing has been changed on the hard disks in a long time and this application is constantly running using up 50% of my processors! What...

I am trying to get a 10.3.9 client to connect via modem to a Microsoft RAS server. The system will only connect when no encytption is requried on the server, however this being a business system that can not be allowed. How do I configure this modem to use 40-56-or preferably 128bit...

For some reason I am getting a Failure Audit every 1 minute in my security log on my primary domain controller. My exchange server is attempting to access AD to change something but failing. The error makes no sense to me. It is an error code 565, category directory service access. User is...

I am running netbackup 5.1 Enterprise server with MP2. The master server is Solaris 9. My Windows 2000 and 2003 servers are loosing tremendous amounts of space to _vxfiVspCacheFile.tmp files. From the little research I have done this is due to Veritas VSP or OTM. Problem is I cannot find how...

I am running PIX 6.3(3) on a 515 failover bundle. I am used to editing ACL's on routers but this seems a bit different. In using an extended dynamic ACL I am used to line numbering 10-20-30 etc... so if I wanted to remove a line I could type: no access-list inbound 10 and line 10 would be...

Seems nobody is making these anymore. We were using a Shiva lanrover 8E on site which has died. Need to replace it with something comparable but updated. Backgroud - We are running Cisco VoIP network, and broke off 96 D2A lines via 248 voice gateways. 5 of these were feeding the lanrover...

I am setting up address translation for a device which will be placed in my network. I want to do this as securly as possible, but will not be able to place the device in the DMZ. I thought I had this figured out a couple months ago, but the project died and I forgot about it. Well, the...

I have a situation which is new to me need some assistance. I have a pix 515 and a vendor who needs to put an appliance in my network. This appliance needs to receive and send data back to the vendors network but also mount a SAMABA share in my network. So best I can determine is: Vendors...

Our corporate DNS servers are blasting our location with bad DNS packets. The best idea I can come up with is that there may be illegal characters in one or more zone files or some incompatibility between Unix and Windows. Here is the situation; I am running split DNS, our internal DNS is on 2...

Is there any way I can set logging in Windows XP for when a program starts or stops? I was thinking that there was a way to set event viewer for just about any process in XP but can not remember for certain. Basicaly I need a simple way to log somewhere with a time and date stamp when IE is...