Search results for query: *

Hi, anyone know if a serial adapter on an Optiset E phone that gathers the CDR information from a HiPath 3800 V7 will still work if upgraded to version 9 ?? kind regards JT

Hi, on HiPath 3800 V9 I get a lot of alarms on !Alarm power on and !Alarm power off h150eErrorDescription.1 = ErrorClass: 21; Number 28; Error class 21 number 28 is described as: 21-028 !Power Alarm on Emergency battery operation due to power outage. Check line voltage. Note...

Hi, on Xpressions Compact V3 I have on a night mailboks set an external destination on the intercept position of the short dial menu. When I call the DDI the system plays the night message, then tells me there cant be made any connection to my called party. The External destination, is set...

Hello I recently put an MP3 player on an analog port of the hipath 3800 V8. however, the music played is going up and down in volume. actually it seems like the music played "falls out" every now and then. from a mobile, when silence comes, there is much noise on the line. but between two...

Hi We have a Gigaset DX800A bought as a backup for a PBX. The phone should be connected directly to the ISDN line, if the PBX fails. But does this phone only support Point to multipoint lines, og also Point to Point lines (no msn´s)?? I cant seem to seize a line, the lines are Point to...

Hello A new installation of openscape web collaboration on an win 2008 R2 server, on VMware. The server is in a DMZ From the server itself, i get a 404 error on http://localhost/admin And my invite links also doesnt work? If I download the client.exe from siemens web, then it works fine...

Hi I have a system that was reset to factory, and I want to run it on a 30 day grace period, however, on my PC in my license Agent, it recognize that this MAC, has been running grace period before, and therefor I cant run grace period on the system. I once could reset the Agent grace period...

Hello In one OpenScape Office MX system, there are 3 companies, company A, B and C When each of the different companies is called, in the OS40 phone it should say what company has been called, to be able to present the customer with the right presentaion. And, the customer does not want...

Hello I have been given 2 Mediatrix AP1102 to setup on a hipath 3800 V8, with an STMI2 HG card. However, it is the AP1120 Cornet version, and from what i can gather from release notes, this is only supported on the hipath 4000 ?? can anyone clarify this?`, is it possible to load it with h.323...

Hello Installed a new OpenSuse 10.3 linux, ´downloaded oso_SOIMG1.40.059_V2_R4.0.059.ISO from SEBA and installed it. How ever, going to the web interface of the OSOHX, I get error SQL data not available. I got a linux expert to check out the postgresql, and no tables were created in the...

Hello I know that Optiset phones arent supported anymore on Siemens HiPath systems V8. However it seems to work, does anyone know if all models will work, even the Optiset E memory with expansion modules? kind regards Juldal

Hello on the OpenScape Voice 4.1 i have an extension that is member of 2 different huntgroups. This extension would like to have a key programmed on the OpenStage SIP phone, to be able to log out of the groups, But one key for each group.. In my experience, I can only make a toggle make busy...

Hello Was wondering if the Ericsson Dialog 4425IP Vision could be registerred on a SIP server as a client? or does it only work as H.323 client on Ericsson PBX? Can you put SIP firmware into the phone perhaps, so this is possible? kind regards Juldal

thread965-1581030 Where do i find te 3 files and the program to upload the files into the phone, I searched SEBA but with no luck. Kind regards JULDAL SOCP

Hello Regarding a HiPath 3550 V7 with a digital card with 24 ports in SLOT10 . I am experiencing funny problems with MULAP groups, and was looking at the cards. The card is called S30810-Q2901-X-7 But shouldnt it be called just S30810-Q2901-X I know that S30810-Q2901-X-G1 is from 3750, so...

hello I have an STRB and an STRBR card, the relae/sensor option card for 3550/3350 and 3500/3300 systems. I only have the OPAL cable for the wall mounted systems though. I want to use a sensor function on the STRBR card in a 3500 system. However, I can see the card under options in Manager E...

Hello having trouble understanding how the sensor works for the HiPath 3550. I have an STRB card connected to the CBCC motherboard. In Manager E the sensor is programmmed to call distribution, a normal extension. But how do i trigger the sensor, to test this works? I have no sensor equipment...

Hello I need the following feature. When calling extension 100, the first destination should be *, the second destination should be 200, and the third destination 300. extension 300, is an analog ITs product, that looks at inbound DTMF. In this equipment, i would like that when calling 100...

Open Stage 40 on HiPath Open Office system. When having connected a headset to the headset port of the OpenStage phone, but using the normal handset to answer a call, upon placing call on hold, and the taking it back, when I take it back, the call is placed in the headset, and not back in the...

Hello Does anyone know if it is possible to not accept a call on an Opticlient 130, and for the call to just take the next position in the destination list. I have seen this feature on Open stage 40 phone, on Open Office system, but this is on a HiPath 3800 V7