I have an ACS rel 6, Ext 12 has a DXD button on what should be co 4, there is no ASA/dxd card in system,and DXD can only can be assigned to ext 10 normally. Any ideas how to clear it?
I have a ACS R6 with 308EC and Partner Messaging Rel7 with 6 port licence in that order in a 5 slot cab.
The Voice mail works fine all week, even 1/2 day on Sat till they close, come in Monday morning and all the ports are busy-
The Voice mail follows weekly work sched, no nite key.
When ports...
I have a new customer that has a ACS rel6 and a Partner Messaging R1 located in his house, he claims every morning at 3AM ext 10? gets a half a beep, I haven't heard it, don't want to be there at 3AM and he descibed it as a beep not ring, no alarms hooked up, any ideas?
Can anyone steer me in the right direction, just aquired an old voicegate voicemail(monitor and keyboard)
Customer needs to change auto attendant recording but lost instructions on how to do it, tried googling it to no avail
Any one have directions for this?
What could cause 18D displays on Euro series 2 to go bad in a location over a period of 1 1/2 to 2 years,
ACS rel 6 with 308EC large PC mail in 5 slot cab.
7 out of 10 sets now have defective or partial displays?
Does anyone remember the plastic wall backboards that slipped over the mod wall plates, they came in colors to match the phone, if so is there still a source to buy them?
I heard a rumor today that Avaya is going to do away with the Partner line in 2011, as well as most of the Nortel line,Guess they want the Office IP to be the only game in town?
Can anyone confirm this.
I have a ACS r7 and Partner Messaging r7, Have the day mode set to 4 rings and works right, can set night mode to what ever I choose , have tried 1 2 and 3 but it always is the same as day, takes 4 rings before hitting AA
PM set to follow bus sched, which it does, recording changes at sched...
TTT back in June you answered one of the questions with
"The schedule and switch modes conflict" Can you expand on what troubles can be expected if you use both, I have 2 customers looking to do so, right now both are just using switch mode.
Their both Messagings Rel 7 , One ACS Rel6 and the...
I got hit with win32:tratbho trogan, it keeps popping up in various dll's which my AV is able to delete/move to quaranteen, nothing I've tried is able to remove it, I've tried all the standard cleaners etc. It's main location is MLJKIJG.DLL, unable to delete it/cut and paste to delete in safe...
I have a home network using a Linksys wireless router, (wtr54gr)which works fine, the IP of the router is 192.168.1.1, I have a notebook from work which has a manual conf IP of 192.168.0.13, is there a way that I can configure the router to allow me access to the internet, without having to...
I have a Magix with both analog trunks and trunks coming in on a T-1 (not PRI), analog trunks dial out no problem,local. LD & international, Trunks on T-1 can call local and LD but not international, as soon as you dial 011+any valid digit 2-9 it gets fast busy, T-1 vendor claims not their...
I have a stand alone ACS r7 , Customer claims that it shuts down at least once a day for a minute or 2 then is fine, claims all leds dead and NDT all stations.
I pulled the maint report for it , all it shows is
Reset event - count 3 - date and time - software initiated-cold start.
My question...
Installed a 100DCD in a magix, have it config'd for T1/esf/b8zs/loop time and all grd start,when connected to T1 all alarms clear, CLEC's switch also clears, have all trunks labeled T1-T24, when dialing 9 and number can see it pick one of the T 1-24 but it goes nowhere, and working with CLEC...
Has anyone installed a 24 channel voice T1, configured as B8ZS and ESF instead of the normal AMI D4?
The local LEC said they needed to do B8ZS due to an older mux feeding building that was all B8ZS.
All the 24 trunks are going to be grd start, just want to know if there is going to be a...
Can someone steer this blind guy in the right direction.
I'm trying to program a few headset hangup buttons, I must have gone thru Winspm many times without finding it, also looked with the 4424LD to no avail, would someone be kind enough to point me in the right direction...
I have a winxp pro machine where I map to a external usb drive on a server (win2000) to verify backups, every time
the winxp machine is shutdown I lose the mapped drive, I have to remap every morning?
To clarify, Server is never shutdown, I can map the drive, then shut my machine down, restart...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.