Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: pbxn
  • Content: Threads
  • Order by date
  1. pbxn

    Call Forward No Answer to Pager Issue

    On a 7925g phone, in UCS 8.5 have call forward no answer/busy/off etc set to route externally to PSTN and dial a pager. The routing works, but the caller only hears 1 beep of the pager number and not all the typical pager tones (beep, beep, beep) which would alert caller that they have connected...
  2. pbxn

    Block/Re-Route Billing Number Inbound

    Have 8.5 cluster across several locations. Users DID, 3040, matches the last 4 on the main PRI billing number (differant prefix)and is getting calls routed to them. Ex. main billing number is 446.3040, and the DID of phone is 687.3040. Since main billing number resides on PSTN PRI, seems call...
  3. pbxn

    CS1000 to AudioCodes

    Any one run into setting up a Tie circuit between an 81 and an AudioCodes gw? I've got a QSig PRI setup, loops are idle and established as is the D-ch.But if I port a DID across the tie using the standard cdp, flen 4, dmi 0, the 4 digit between the nortel and audio codes works, but breaks...
  4. pbxn

    CUCM 6.1 Forward no answer/busy

    We've started to incorporate Cisco wireless phones into our environment to replace our exisitng spectranlink system. When a call went to a busy spectralink, and was routed to the hunt destination it showed busy then the number on the nortel desk set (hunt dn). Additionally if a call to a...
  5. pbxn

    Want to block digits dialed from either ADL or SSU

    Most users dial this number via a non-display 500 set using a speed dial. Now more users are getting on this system that have digital sets. Is there a way a to block the actual digits dialed from either an ADL or ssu? This is for employees that clock in their time from a phone and we don't want...
  6. pbxn

    Element Manager Virtual Terminal

    Curious to know if those that use EM Virtual Terminal to access their switches, if you have noticed that when you print a card TNB per say, sometimes it will freeze, almost like a buffer issue? My environment has various releases from 4.5 to now a new 6.0 and all sites act the same. It doesn't...
  7. pbxn

    Daylight Savings Time Reminder

    DST kicks in again this weekend, think 2A on Sunday. Just sending out a friendly reminder to double check your switch's. Refer to GHTROUTS site for instructions or login using admin2 ld 2 .tdst<cr> to check your current settings .Fdst a b c d <for your dst date and time entry to forward> As...
  8. pbxn

    Phone Display ideas

    Currently have a clock in/out system that employee's use on campus. The server records the phone/location of where they employee did their clock in/out from, thus preventing employees from cheating the system and clocking in from their cell, or home number etc. Current config on the phones is a...
  9. pbxn

    Avaya to Bid for Nortel Enterprise

    http://www.marketwatch.com/story/nortel-to-sell-solutions-unit-for-475-mln
  10. pbxn

    Multiple CP versions

    We're in the process of upgrading some of our sites, but also will have some on older releases for at least a few months. Question is, will the newer version of app builder work on the older CP releases? Only ask as now when we try to access a newly upgraded cp via app builder, we get "version...
  11. pbxn

    MICA/MICB

    Currently have Rls. 3.0 MICB, and customer was shipped (a few years ago) release 4 upgrade (2 cards, keycodes but no dongle). Question is, can I take the dongle from a MICA card and use it for the 2nd MICB card? Back when the customer ordered the upgrade, someone?? don't know who forgot to add...
  12. pbxn

    i2004 phase 1 and Release 5.0

    Have a remote site (the only one up to rls 5.0) and when you hang a i2004 phase 1 phone, the phone works but the keys are blank. Its not a phone issue, as I have reconfigured phone for my local site (release 4.0 to 4.5) and the phone display works fine. Don't think its a firmware issue, phone...
  13. pbxn

    Class Modem Cards

    Looking for a little clarification on these cards. We've had an issue where clid would sometimes be displayed and sometimes not, on our analog devices. During busy analog line usage times, the clid delivery was really hit or miss. During off peak analog device usage times, clid would be passed...
  14. pbxn

    MICB Upgrade Time

    Been reading over the ntp to upgrade our current MICB to release 4. Seems pretty simple and all the steps are there. Just curious what sort of downtime should I expect, an hour or so? Will be replacing 2 cards (1 card is currently active, not sure why they didn't run in dual mode), installing...
  15. pbxn

    Seizing TIE

    is there a way to seize a channel on a TIE between sites for testing like ld32 trk....? I thought I did something like this in the past, but tried to with my mta phone with no success. Thanks
  16. pbxn

    Nortel to Inter-Tel -5000

    Has anyone configured a PRI setup for a Nortel switch to an Inter-tel-5000? I've tried several configs thus far and none of them have worked. Currently have it set to ess5, but the d-channel won't establish. Seems I have to provide clocking for the D-channel to work, and that is not an option...
  17. pbxn

    RTD only shows 1 skillset

    Have Contact Center, and currently when you open rtd and choose one of the default skillset displays, it opens, connects but only displays one skillset. This is the same for webadmin and created users as well. Any place I should look to allow the viewing of mulitple skillsets on one rtd screen...
  18. pbxn

    MIRAN 1.0 TUI

    Have a remote site that has a MIRAN 1.0 card. Problem with 1.0 is the #3 option, (to see what channel your ran is recorded on) doesn't work with release 1.0. The only books I have onsite are the 2.0 version. Any one have an idea on how to check the channels/RAN through the TUI and not on the...
  19. pbxn

    external call forward w/ auth codes

    I have an 81C configured with auth codes. All phones in this site share the same ncos and tgar. With the growing prices of gas, working from home a day or two a week is becoming standard around here. I have a user that lives in another area code that needs to have external cfw to their home. I...
  20. pbxn

    Trying to add IP to Opt 11

    Have an option 11 that has not been configured to my company's IP scheme. So I have tried to add a new host/route and each time I enter the info I get the following code. SCH6579 Config: Update "1xx.x.x.xxx" "x.x.x.x1" failed. NTP says ConfL error string - configuration error. Not exactly much...

Part and Inventory Search

Back
Top