Search results for query: *

I recently took an old HP laptop from our recycling (retired) pile at work, and was going to re-purpose it. Within Windows I took it off the domain and just put it on a workgroup I created. I rebooted but now can't get logged into the laptop, as it doesn't seem to recognize my old (domain)...

I have a single Cisco 3845 as my Internet router. Currently I have two 100 Mbps Ethernet circuits from the same ISP, and both of those circuits terminate on the same router at the ISP. We have BGP in place for load balancing and failover. I am changing out one of the two circuits so that I'll...

I have an SSL certificate on my ASA 5520 (running 8.3(2)) code that is expiring soon. My current certificate that was installed a few years ago was created with a key pair bit size of 1024. My certificate authority will only issue certs now with a minimum key pair bit size of 2048. Via the...

I have a Cisco 4510R switch with dual Sup Engine V's (in slots 1 & 2), and currently five WS-X4548-GB-RF45 line cards (in slots 3 thru 7). I'm running 12.2(50)SG for the IOS level. I've purchaed another of the same line card, and I'm wondering what I need to do to add it. I plan to power down...

I just ordered and received the product authorization key to add VPN for mobile functionality to my ASA 5520, but I am not sure I to install the authorization key. Can someone point me to a document that walks me through the command line or ASDM step to get this installed and implemented? My...

I have a Cisco 3845 router running 12.4(24)T. This router came default with two GigabitEthernet interfaces. I was using one as my LAN connection (inside) and one connects to a 100 Mbps Ethernet circuit from my ISP (outside). I am adding a second 100 Mbps Ethernet circuit for diversity and...

I have a Cisco 2821 running IOS 12.4(20)T3 which acts as our voice gateway. I have three PRI circuits connected to it, along with some POTS circuits. I am attempting to determine how many of the 72 channels (3 x 24) of the PRI's I am using at a maximum. Is there a command to run that will...

I am looking to upgrade from my current 3845, which I am pushing the limits on and I don't think a 3945 is a good long term solution. My 3845 is running at 70% - 80% CPU during the day since I have added more bandwidth to it (full DS3 plus 100 Mbps Ethernet w/ BGP) and have a growing ACL. This...

I have the new image (12.4 T5) on the router along with the original IOS image (12.4 7g). I have the boot statement changed to reflect the new image, but it still boots to the old one. What am I doing wrong? Vanguard#show run Building configuration... Current configuration : 10968 bytes ...

I currently have the following access lists in place on a remote router (10.27.0.1 255.255.255.0). I need to add the ability to allow ftp from this remote router to a server in my DMZ (10.253.0.0 255.255.0.0) at my host data center location. We've installed a temporary job site camera at the...

I have a 2620 router at a remote site running IOS 12.2(5d) and all of a sudden everyday this week our monitoring tools are showing the CPU very high (often at or near 100%). I found the following in the log and wonder if anyone can help be decrypt this or suggest a root cause. 1d16h...

How do I go about upgrading the Cisco VPN client that I am currently deploying from my ASA firewall? Also which client do I need for the ASA? I have been testing the latest 2.3.0185 client by using the Windows .msi install file for a few clients, but I want to upgrade all clients that connect...

I am running Cisco's SSL VPN solution on my ASA 5520's (primary / secondar failover scenario). I have 8.0(4) code running. I can see in real time when my users are logged into the VPN, but is there any historical logs available on the ASA. On occassion I get requests to check up on remote...

Can anyone point me to some good Cisco documents about modifying / customizing the ASA VPN portal page (adding links to my terminal servers and websites for clientless access). Does this requite HTML knowledge, or how is it customizable? [ponder] I am running dual ASA 5520's with 8.0(4) code...

My ISP wants me to allow pings (ICMP) from their side to my router so they can notify me if my router or the circuit goes down. I guess it's been a long week and I can't think what I need my statement(s) to look like. On my router I have ACL 100 applied to outbound traffic on my serial...

I need to allow ICMP from my network provider (204.132.x.x) to my router (which has an internal address of 10.1.0.3) so that they can monitor circuit and router uptime. What does my accesss-list entry need to look like? I am thinking I don't want to use my internal 10.1.0.3 address, but...

I have dual ASA 5520's and I am working through setting them up to provide remote user access via SSL VPN. Can I use a wildcard SSL certificate on the ASA for this purpose. If not, is there a specific type of SSL cert. that I need? I normally get my certs. from Comodo.

I could use some help thinking through the creation of a new rule or set of rules. I need to allow outbound ftp/port 21 from a server that has two NIC's (two seperate IP's). Both IP's have a NAT to the outside. The ftp needs to go to one specific IP as well as another range of IP's (/28). So...

I have a Cisco 2620 router that just continues to reboot, never getting to a prompt to allow me to log into it. As I watch it boot I see a Bus Error exception message as follows and could use some help troubleshooting: IOS (tm) C2600 Software (C2600-I-M), Version 12.2(5d), RELEASE SOFTWARE...

Historically I have had a single PIX firewall and to that I have connected a Packeteer 6500 shaping appliance. Looking ahead I am moving to dual ASA 5520 firewall appliances but still only the single Packeteer. My ASA's will be set up in active / standby mode. I could use some help in...