Search results for query: *

Good day all, I've got a bit of an issue and I can't seem to find the answer. I have and opt 81C rls 25.40 with PRI. I need to strip the incoming CLID and send the one from the switch and cant remember how to do it. I 've tried Phantom DN to ACD to Phantom DN. IDC to ACD to Phantom.- IDC to...

Got an old STK- rls 3. on a CICS 4.1 all is working fine but I need to know if there is a way to have the AA answer answer on the first ring after hrs. right now it ring 4 times during the day. but will like to have it answer at 0 rings after 5 pm. any ideas.

We have an Elite IPK -release 4(I think)- I need to know what we will need to switch from a T1 to a PRI. I know that we need to get a PRT(1)-U10 ISDN or PRT (1)-U20 ISDN PRI Card just want to make sure that I dont miss anything do we need keycodes or anyhting like that os is it just a hardware...

how do I find the software relese of an elite system thru the phone? Thank you

looking for someone in the Phoenix AZ area to help with an NEC elite, I need to get a PRI installed and possibli an intercom system(paging) also get a few pointers helping you do the dirty work. let me know the cost and what other info is needed. I'm a Nortel/Avaya tech.

can anyone point where I could find an installers guide for an InterTel Axxess system Thank you

Does anyone know where I can Find an installers guide for a Inter Tel Axxess system. Thank you

Hello All, I heva a little issue and don't seem to find a setting that I can change, I have 2 Partner ACS R7, every time I use the speaker on my phone and call someone after the party hangs up! my phone stays up and the line will not disconnect, if I use the handset when I put it down it hangs...

I have been trying to get a pocket pc to run terminal emulation software and connect to a pbx and make changes. has anyone made this work or is there a device that anyone can sugest? I just hate having to boot up my old piece of crap laptop "company provided" just to make simple changes to...

I have a bit of an issue, I have a Mics 7.0 with 18 POTS lines that "ring only" to 5 sets and when the phones ring we can't tell if the call is external or internal, I think it used to work at one point but after so many programming changes ovet time I can't find the correct field to turn off...

Hello all I got a MICS 7.0 with 8 Loop start lines, they are set to ring only on several sets we used to be able to see on the display the line ringing but after some changes were made this no longer happens, we can't see if the phone is ringing from an outside line, a transfer or someone...

Hello all I got a question from a client that wants to know the maximun number of conference parties you can have I know you can do 3 and in the option switches you can do 6, but I'm not sure on te nortars. any info would be apreciated. I hope they dont have to ge a conference bridge.

good morning to all I have not worked on ah HMS400 to much but I need to have a secondary DN add to a mailbox and cant seem to find the right field for it like I used to see in MM or call pilot can anyone point me in the right direction...

Good Day to all I have an old OPT 11C rls 23.35, It seems that we get a 13-15 sec delay from the time we complete dialing the number to the time I get a reply from the CO. I changed the timers on the RDB but its still happening any ideas. here is teh RDB.. TYPE RDB CUST 00 DMOD ROUT 0 DES NEW...

good day all! seeing if any of you have come across this issues befor. I have a client with an HMS400 4.0.2, we installed it about 2 months ago and all looked good but all of a sudden some issues began to pop up here and ther like the PMS not talking to the switch and not refreshing the room...

hello all I got a MICS DR6.1 and need to install a pri code but the one that was given to me by the customer doesn't seem to work. I need to know if I'm doing this right once I log in to the MICS I go to software id. than password key and enter the 3 strings of digits and comeback with an...

I was given the task to install an old MICS that has been sitting on a shelf for about 4 years . I powered the thing up and all seems to work fine. I restit the system to defaults? but i have no idea what software level it is.. the version is 30mdF11 NAT. also I need to know if this software...

anyone with a sugestion on this, I have a shelf that I keep getting: pwr001 pwsp 00 3 1 and pwwr001 pwsp 00 3 2. I hav ereplaced the power suply and the ring gen on this shelf and I keep getting the same alarm, the top cap is red and today all my analog sets are dead i cannot get dial tone out...

Good day to all! I have a question that one of you might have dealt with in the past but I cant seem to find the answer. my pbx is a CS1000M running 5.5 and when I dial 911 from anywhere in the property I get a record on my printer and tty ports like its supposed to happen. but when someone dial...

Good day All! I have a bit of an issue I've got a CS1000M 4.5 running on CP PII, the issue I'm having is that when ever I insert the master system monitor to core 0, and enable tty 0 as soon as I strike the key enter. the column goes down, the 5 power switches on the back of the pedestal trip...