Search results for query: *

I have tried to implement cp5.0 image disks and use the full backup available and keep getting denied. I must be doing something wrong with the process but for the life of me I'm stumped. Must have tried this 20 times regardless of what version of 5.0 version. Need a procedure push... The...

Basically when the centralized AA/vm redirects a call to my remote node and that extension is hard cfw to the PSTN the CLID shows the AA agnt DN vs the CLID table info setup for the node. I think I have changed everything with no luck so far. This particular site the telco allows my CLID. The...

Ahh- Cannot access get to the node page in EM to sync the cs and ss. I can get to em page I see the ss etc. When I click on it is hopeless. Looked through forum but nothing so far has worked CS is patch and so is SS. CS is CPPM (vx) and SS is a CPPM also. Any thoughts how to get into EM so I...

Scenario - trying to implement SIPL with (1120e) on a CS1000E Rlse 7.5 SP24 - H323 licenses, SIPL and SIP port licenses - NO SIP trunk license. Running a CPPM core and a CPPM SS - with EM,SS, and NRS as the apps. Dialling plans in NRS and PBX implemented. Situation - I seem to be able to get...

Hello all, I'm getting ready to upgrade a CS1000M(PIV VxWorks) from 7.5 to 7.6. All equipment and configuration to remain the same except I'm considering to deploy my 2 spare SS (COTS HP DL360 G7) and replace the identical units that are in service - one is a stand alone NRS and one is the...

Am currently running Callpilot 5.0 on a 1006R platform with SU 11 installed. Wanting to go to 5.1.3 - do I need to run the upgrade wizard (V302) or can I just proceed with the appropriate 5.1.3 SU along with the GA/Sec PEPS ? Every time I read the damn NTP I change my mind. I believe the SU...

Am just researching our pending platform change from an old 1002RP (war horse) to a new 1006R (stand alone). Presently running 5.0 and am relatively up to date with the peps (154 vs 16x something last time I looked) My concern is the data migration. Because of the different tape drives and...

I hate 7.5 !!!!! Just finished upgrade to 7.5 from release 5.5 System is a CS1000E with 2 COTS servers (HP DL360G7 Servers) Everything seems to have gone relatively well however to my horror my Primary Security Server shuts off by itself every 1- 2.5 hours.I check the logs to see what happens...

Am running Rlse 7.5 on a stand alone NRS and will be upgrading my various sites in the next couple of weeks. NRS seems to work fine however I am having absolutely no luck in viewing any of the traffic via a putty ssh interface such as the GK registration requests etc when I direct the output to...

I am in the preliminary stages of getting ready to go to Rlse 7.5 We have 3 nodes running Rlse 5.5 mixed TDM and IP [CS1000E x2,CS1000M x1] All are networked via H323. The NRS is at the CS1000M node. ELANS are presently NOT routeable at any node location.(only within own node) ISP1100 servers...

We are in the process of going from Rlse 5.5 to 7.5 on a Succesion 1000M (multi-group). My concern is our PRI's. Presently using QPC720 cards with no issues. Avaya says they won't work and should not have worked at 5.5. Reviewing thread 798-1550366 and thread 798-1508402. Will change the T1's to...

Has any one had an issue with the new MGC cards Am running a CS1000E, Rlse 5.5. The old MGC cards work fine but the new cards (have got 2) after the initial CLI configuration and loadware upgrade fail to work properly. The symptom is the inability to access the MGC via CLI. You cannot get to a...

Was informed by the admin staff that records with the ACOD 7109 were not showing up in their RAW data. We have H323 Tie Trunks also and those records are just fine. What is frustrating is they say this occurred around the end of October. Ahh @@#$$ Behind in the billing.... To make a long story...

Node C system is a CS1000E Release 5.5 When creating an Auth Code Block in Node C and as soon as the AUB is created it prevents calls from hitting the Callpilot Auto Attendant in Node A. I have implemted the latest PEPS from the vendor across all nodes however this did not resolve. Have...

Anyone have an issue loading the raid power console 5.00n driver during an upgrade to 5.0 ? Should be straight forward ? My system is as a CallPilot 1002RP Release 3.0,LSI 1600 board, Raid Driver version is 6.45.2.32. All pre-checks are golden (actually green) except for the power console...

Hi gang, this is probably simple but I'm confused as normal. Have implemented centralzed attendant services (Callpilot 3.0) using H323 trunking between sites. Each remote site utilizes COT for node access. Have noticed that all services seem to be good if CDP isutilized directly or if calls are...

Hi all, At one of our nodes we have a Succession 1000M(cabinet) running release 4.5 which utilizes dedicated "dark" fibre feeds to (qty 3) IP expansion cabinets at remote buildings. Because our system is SSC it seems we have to upgrade to a different processor (CP PM) and Media Gateway when we...

Does access to an external IMAP server from "My CallPilot' require a different keycode feature other than "DeskTop Messaging" ? I have installed DeskTop Messaging (Novell Groupwise) and it works fine as does getting voice mail messages utilizing "My CallPilot". When I try to access the IMAP...

The saga continues... If both nodes are running different versions of software would the Alternate NRS fail to recognize the actual status/settings associated with the Primary NRS configuration? Have basically got everything up and running utilizing H323 trunking between node A(main) and node...

The installation of the second networked switch is going well with this forums valueable assistance. Basically installed in the lab I have an Opt 11(c) connected to my main site via H323 virtual Trunks. The main site is an Opt 81 (C). I am using H323 virtual trunks between the sites. Believe it...