Search results for query: *

Hi all, Does anyone know any none-Cisco routers which are compatible with a Cisco 1841 for a router-to-router IPsec VPN tunnel? I've had a look at the Cisco 887's but they are a over the budget I have for the project! Many thanks in advance Jim

Hi all, I have found the following User accounts in one of our Windows 2003 Servers... Start > Administrative Tools > Computer Management > Local Users and Groups > Users com db2admin newnew100 sys sysadmin These appear alongside accounts I have created and the obvious defaults eg...

Hi all, I have two routers on a network. Each router is configured for router-on-a-stick inter VLAN-routing. VLAN 1 192.168.42.0/24 VLAN 2 192.168.43.0/24 HSRP is active between the two routers which are addressed in each VLAN as follows R1 fa 0/0 MAC 11-11-11-11-11-11 fa0/0.1 IP...

Hi all, Wondering if anyone can help. I have recently been asked to upgrade our companies ADSL service from ADSL Max to ADSL 2+. To do this I have bought and installed an ADSL HWIC and upgraded the 1841 to (C1841-ADVSECURITYK9-M), Version 12.4(24)T which I was told was required for the service...

Hello all, I am looking at implementing PublicIP`s ZoneCD as a wireless controller for a hotspot I am installing. The two Access Points I am looking at are Cisco Aironet LWAPP 1131 Access Points. I cannot seem to find any kind of compatibility chart with details of what ZoneCD supports and...

Hi all, I am having problems with routing multicast traffic between three sites. Two of the sites (BFD/ FOR) are connected back to the third (RIV) using 100Mb connections as follows: BFD-----RIV-----FOR The connections between sites were originally Layer 2 and we had a nightmare with all...

Hi all, I have a requirement to enable Split Tunnelling with an L2TP/IPSec connection. The remote client wishes to access the company network using an L2TP connection whilst at the same time having Internet traffic route out of his local DSL (8Mb)connection. I use a Cisco 1841 router acting...

Hi all, I am trying to establish communication between multiple VPN spoke using the VPN hub as the centralised server. The device I am using to terminate the VPNs at the central site is a 1751 cisco router running IOS 12.3(2). The clients all use Cisco VPN soft client programme installed on...

Hi all, Quick question... I have the following configured on a FastEthernet Interface: interface FastEthernet0/0 description LAN Port ip address 192.168.42.1 255.255.255.0 no ip unreachables ip nat inside ip inspect standard in ip route-cache flow ip policy route-map NO_NAT speed auto...

Hi all I have a router which connects to the Internet via ADSL. The ATM, Dialer and Virtual-Access interfaces have had no bandwidth configuration done on them, they are set to whatever they are in default. I have just run a bandwidth tester from a PC on the local network to measure our up/down...

Hi all, Related to a problem posted previously, I have reprogrammed a routers VPN settings, changing only the names of transform sets etc... Now our remote clients cannot connect: Details as follows: Old crypto configuration: aaa authentication login userauthen local aaa authorization...

Hello, I was wondering if someone could clarify something for me? We have a Cisco 1761 router acting as an IPSec VPN server to connect multiple remote users with Cisco VPN Client software Someone else configured the router and I am trying to figure out why he has done certain things in the...

Hi all, I know this is not strictly a Cisco device (only a subsidiary!!) but has anyone set up a Linksys WPC54G Wireless ADSL Gateway in France? I cannot get the **** thing to train with the ISP! ADSL settings are as follows: ISP: Wanadoo Encapsulation: PPPoA LLC VPI: 8 VCI: 35 DSL Modulation...

Hi all, has anyone set up a Linksys WPC54G Wireless ADSL Gateway in France? I cannot get the **** thing to train with the ISP! ADSL settings are as follows: ISP: Wanadoo Encapsulation: PPPoA LLC VPI: 8 VCI: 35 DSL Modulation: Multimode Then there is a username and password option.... According...

Hi all, I am currently having a problem with my ISA firewall, i am trying to set up remote access to the network and run a remote IP phone at the same time. The problem is that the phone uses PPTP (non configurable) and so do the Windows VPN clients. The ISA will not terminate two VPNs from the...

Hi all, I was wondering if anyone can help... When I run the netstat -a command on one of our servers it is showing multiple TCP ESTABLISHED connections to the loopback address 127.0.0.1 on differant ports. Sample output below.. TCP 127.0.0.1:1080 127.0.0.1:9092 ESTABLISHED TCP...

Hi all, Not an IP Office question, I know, however cant seem to find any forums for Avaya`s ageing INDeX system!! I have had a query today asking whether you can connect an iPod to the INDeX, which you can, however the sound is awful. I suspect this is the lead connecting the two and wondered...

Hi all, I have recently tried setting up a remote IP Hardphone which creates it`s own VPN tunnel through the internet terminating on the telephone system at the main office. The main office internet facing router is a Cisco 1761. The IP Hardphone uses pptp as its VPN protocol on port 1723. I...

Hi all, I have recently installed 2 1721 routers between 2 sites that are providing a connection across an E1 circuit. The routers have WIC-1Ts installed in them which in turn connect to DC1000 modems providing the media conversion between X.21 and G703. The link provides both internal voice...

Hi all, I have a problem with a PC booting. It was originally displaying lots of random letters whilst performing the POST and in the BIOS. We have replaced the graphics card which has sorted this but now, on the boot menu, it will not allow us to select Safe Mode, Start Normally etc. The...