Search results for query: *

I currently have a 6408D+ set running off of a 2224Cp port that I need to install in a on property location but the station location is just over the footage limit of 2,500 ft from the PBX. The connection is point to point copper cable [ on same property ] I tested the set at the distant...

I have a Partner ACS 8.0 that is currently in pooled mode with 20 stations and 12 lines. My customer wants to add another separate department to his business with 5 stations and 4 new lines. I would like to put the new department in his system as squared lines using Line assignment #301 and then...

Hello, I'm in search of blank 24 port or 48 port patch panels that I can insert the Systimax MPS 100E jacks in one at a time as needed instead of buying a regular loaded Cat 5 or Cat 6 patch panel. There are occasions when installation would be easier if I could just terminate the jack outside...

Anyone out there have anything good, bad or whatever to say about the new tool out for fishing insulated walls. It's called " Magnepull cable pulling tool " Just wondering if it is really worth average $ 130.00 Rich

I'm quite sure the answer to my question is NO but since this site has so much talent out there I feel it's worth a try. I just placed into service a new ACS 7.0 with Partner messaging 7.0 Voice Mail at a mid-size real estate office. When it came time to train my users on how to do a system...

I have a new 7.0 ACS with 3 ea 308 boards and a new Messaging 7.0...6-ports .Px 43 thru 48 I will be putting the system into service with about 22 sets, leaving 11 empty ports for future growth.[Px 32 thru 42].....It is a mid-size Real Estate office. My customers employees are not good with...

I have a customer with a Prologix V6 and presently has a DID trunk group and DOD trunk group both connected by copper lines from their local provider. The local provider want's to sell them a new T-1 circuit....A [Flex-Path] and combine the Inward DID lines with the outbound lines... a PRI trunk...

I have beat myself up for the last few nights on this one and am asking for some help!!! Touchtonetommy or Jshelton or anyone. My goal is to connect my laptop directly to a new Partner Messaging 7.0 unit so I can use the Admin software that is installed on my laptop....It's something that i...

Anyone out there have any sugestions on a good, better, best way to put the output of the SMDR onto a cutomers network. They are looking at several Call Accounting software companys and more than likley will just have it loaded on 1 PC in house. I know that I can use a 355AF adapter to take the...

I just put a new ACS 7.0 in service today and came up with a small but important issue. My customer wants to be able to bridge in on an active line being used by another station...very simple..Just touch the line button in use and then the 1st user will see his line light alternate red/green...

I have a customer with a Prologix V9 and a regular 302C console at the front desk. [Att# 1 Px number is 7000] Is there a good, better, best way to send all calls, or call forward calls that go to the console, to a regular station using a 6408D+ set. This customer wants the ability for the...

I have searched all of the threads but no luck.. I'm looking for a reccomended battery backup configuration to apply to the Partner systems for holdover time when power is out. Partner ACS 7.0 + other cards,308,Messaging etc. I know I have seen it somewhere on this site but cannot find it...

My customer has a rather old release 4.0 Legend and has recently converted his trunks to Centrex service.. Now users have to dial 9 twice for a outside line...No problem so far... The question from him is... "how can users just dial 911 for emergency calls without having to dial 9911".. This...

I have a V12 Definity with an old DID trunk group [copper lines] only 8 members.. I did a " list trace tac 82 " command to monitor traffic on that trunk group but I notice that it times out after about 45 minutes if no calls come in.... I looked at " display system parameters".. features...

Anyone have a bad experiences or problems with remote call forwarding to a cell phone. I have installed plenty of the ACS 7.0 systems but never had to program & use the call forward feature. I'm giving a new customer a proposal for a new system and I'm up against another vendor who is pitching...

I have a customer with a recently upgrade Definity rel V12. They have 2 T-1 circuits for inbound & outbound traffic. The provider of the T-1's is asking if my switch can be programmed to choose a specific outbound trunk selection order..This is one big happy trunk group of 48 members today. He...

Anyone out there have any suggestions as how a Partner ACS can intergrate with a customers PC that uses Outlook Express for dialing customers. My customer just wants to go to Outlook and click on the telephone number and let the PC send the digits..Hmmmm I'm sure there must be some sort of...

I have a customer who has asked me about using Vonage for dial tone into his Partner system. [ Pre ACS ] He is using Vonage at his home and likes the price..but... I'm curious about function...i.e. disconnect timing, hold,, ring current , etc... Anyone have anything to say ...be it good or bad...

My customer has a Prolgix V12..I did not do the programming with this issue but here goes. They have a small Reservations group of 8 extensions..All 6408D+ sets. The extensions are in hunt group 2.. A UCD hunt group..The customer would like callers to go to a general voice mail box when the hunt...

Anyone out there have any suggestions for installation and programming training for Avaya IP office... I know the large distributers have hands on classes, usually a week. and somewhat expensive... I'm very familiar with Partner thru Definity installation and programming..36 years as a Lucent...